GL Filter Series ? Element Type A0 pages

"

Product - Specification

nnnn

GL Filter Series - Element Type A

nnnn

Brief Description

nnnn

Parker Zander, High-performance GL-

nnnn

series filters, containing A grade filter

nnnn

elements are designed for the surface-

nnnn

active adsorption of oil vapours. They

nnnn

reliably remove oil odours from pre-

nnnn

dried compressed air or compressed

nnnn

nitrogen gas where a grade XL filter is

nnnn

installed upstream.

nnnn

Innovative filter housing and filter ele-

nnnn

ment design leads to optimum flow

nnnn

characteristics at minimum pressure

nnnn

drops: This results in cost savings

nnnn

throughout the operating lifetime of the

nnnn

filter element at reliable levels of filtra-

nnnn

tion performance.

nnnn

High-capacity filter element media,

nnnn

impregnated with activated carbon

nnnn

granulate, guarantees high affinity at

nnnn

constantly low differential pressure. This

nnnn

efficiency is additionally supported by

nnnn

deep-pleating technology enabling 4.5

nnnn

times more effective filtration surface

nnnn

area when compared with conventional

nnnn

filter elements.

nnnn

The light-weight, compact construction,

nnnn

ensures a requirement for minimum

nnnn

clearance below the filter bowl for ele-

nnnn

ment removal. The simple method of

nnnn

installing the filter element into the filter

nnnn

bowl, in conjunction with a secure, air-

nnnn

tight housing closure avoids installation

nnnn

errors and prevents by-pass between

nnnn

the contaminated and clean enclosures.

nnnn

The inlet-port is clearly marked by an

nnnn

aluminium feature above and below the

nnnn

opening signifying the correct direction

nnnn

of flow through the filter element.

nnnn

Performance overview:

nnnn

Model	Port Size1	Nominal2	Element
GL2A	1/4	36	CP1008A
GL3A	3/8	55	CP2010A
GL5A	1/2	72	CP2010A
GL7A	3/4	108	CP2020A
GL9A	1	216	CP3025A
GL11A	1 1/2	396	CP3040A
GL12A	1 1/2	576	CP4040A
GL13A	2	792	CP4050A
GL14A	2 1/2	1188	CP4065A
GL17A	2 1/2	1548	CP5065A
GL19A	3	2232	CP5080A

nnnn

1: Port size as per DIN ISO 228

nnnn

(BSP-P) or ANSI B 1.20.1

nnnn

(NPT-F)

nnnn

2: Flow rates in m3/h related to

nnnn

1 bara and 20 °C, compressed

nnnn

to 7 bar. Where the minimum

nnnn

a

nnnn

operating pressure deviates,

nnnn

the actual flow rate must be

nnnn

multiplied with the respective

nnnn

correction factor f (see the

nnnn

respective table) to determine

nnnn

the required nominal flow rate

nnnn

and the appropriately required

nnnn

filter model.

nnnn

Scope of supply:

nnnn

Ready-to-install filter, complete with filter element and manual drain HV15.Option-

nnnn

ally available without a drain (in this case, not ready-to-install).

nnnn

Parker

nnnn

I

nnnn

Zander

nnnn

ENGINEERING YOUR SUCCESS.

"