درباره سازنده

With over sixty combined years of experience in control equipment and building automation, directors Doug McIntosh and Paul Balazovjech had acquired access to a line of control valves, actuators, thermostats and controls used in HVAC and building automation systems (BAS). In 1989, with the proliferation of building automation systems throughout North America it became obvious that a valuable niche market existed in peripheral devices for BAS contractors coast to coast. A separate company was formed and Spartan Peripheral Devices began distribution. Since then, sales and manufacturing have expanded to include OEM manufacturers of fan coil units, building automation accounts coast to coast and exports to China, the Far East, Europe and the U.K.

The name Spartan was selected for two reasons: a simple, reliable and no-nonsense approach; and “spartan“ control of energy in an increasingly energy-conscious world. Spartan Peripheral Devices is a company devoted to the supply of peripheral components only, with no connection or interest in competing in the BAS scene.

Over the last few years, the product line has changed as manufacturing in North America takes over from imports. Today the company has reversed the tide, becoming an exporter of goods and producing a superior yet competitively priced North American product.

Research and development is an ongoing priority and new products and increasing sales show the results. As always, Spartan production goals center around robust quality, reliability, value, user-friendly interface and innovation. Featured are `smart` cards for self-adjusting actuators, auto span and auto zero electronics, modulating thermostats to augment BAS systems, coupled with bulletins such as the Control Value Selection Guide, and Electronic Control Strategies for Fan Coil Unit Ventilators.

Spartan covers the full range:

– Compact globe type zone valves, fail safe or fail in last position, two position or modulating, two, three or four-
port versions. Electric, electronic (both gear and thermoelectric hot wax), pneumatic and self-acting formats.
– ½“ through 2“ screwed and 21/2“ flanged, globe control valves, two-way or three-way, available with pneumatic, electric and electronic actuators, normally open, normally closed or fail in last position.
– Intriguing thermostats, differential pressure regulators and actuators compliment the line, and prompt assistance, good deliveries and how-to-do-it reports back up the service.

For building owners, consulting mechanical engineers, OEM manufacturers of HVAC equipment, building automation system installers, wholesalers and stock distributors, Spartan Peripheral Devices has a viable option.

TE1510 pages

نسخه متنی

Thermostats

DATA SHEET

TE151 Modulating 0-10Vdc, LCD Electronic Thermostat
with single speed fan switch 24Vac
Description
Modulating proportional plus integral (P+I) 0-10 Vdc electronic room thermostat with digital
display and set point adjustment. It is suitable for controlling a single speed fan as well as
controlling a single heating or cooling modulating valve to maintain the room temperature. An
On/ Auto Switch on the thermostat cover will switch the fan On. In Auto position, it will cycle
the fan from the room temperature if reaching the set point, this cycle is for maximum energy
saving. Heating/Off/Cooling switch on the thermostat cover will select heating or cooling mode.
Jumper J2 set to U.S. or E..U. setting will reverse the 0-10Vdc signal. Selectable between ºC and
ºF scales by jumper on PCB.

Specifications
Operating voltage:
Power consumption:
Control output:
Fan Switch:
Sensing Element:
Connection terminals:
Digital Display:
Set point range:
Operating temperature:
Housing cover/base color:
Wall mounting plate:

Shipping weight:
Agency approval:

24Vac, 50/60Hz, +/- 20%
Maximum 3Va
0-10Vdc, 30mA
1A, 24Vac
NTC Thermistor
Use solid wire 22 AWG to 14 AWG
Temperature in ˚C or ˚F, set point,
heating or cooling output
40-95ºF in 1ºF resolution
5-35ºC in 0.5ºC resolution
32-122 ºF or 0-50 ºC, < 95% RH
Cover white, base grey
Color white, mounting holes for
European and North American
standards, fits 2 x 4 electric box
0.5Lbs (0.225 Kg)
Heat
Conforms to CE requirements
Off
Class 2 as per UL/CSA
Cool

Quality, affordable electronic
room thermostat with digital
display from Spartan

Changing the Set Point
To change set point use the
increase or decrease keys.
LCD display will illuminate after
pressing hand key.
When the thermostat is in heating
mode a thermometer will appear
in the display. It will flash when
there is a demand for heat.

Wiring Diagram
1
6

Red

White

When the thermostat is in cooling
mode a snow flake will appear in
the display. It will flash when
there is a demand for cooling.
On Power Failure
The set-point will return to the
factory default setting 75˚F/24˚C.

Fan Relay

L N

24VAC

Black

0-10VDC

Neutral or Ground

Fan Switch
On
Auto

Line
Thermostat
Terminal

Mounting Dimensions

Cover Removal

3.520”
[89mm]

TE120 Cover Removal Instructions
To remove the cover simply remove the screws at
the bottom of the unit with a screwdriver (1 and 2).
The cover then is removed by pulling it out and
then up (3 and 4).
1.376”
[35mm]

4.178”
[106mm]
1.200”
[30mm]

1.010”
[26mm]

Disclaimer:
The installation and service
should be performed by
trained personnel. To avoid
electric shock ensure the
electrical source is
switched off.
Installation:
Thermostats can be
installed on a standard
20-20 2X4 electric box, or
directly on the flat wall
surface, and away from
the heat source.
Do not expose to water.

1.188”
[30mm]

Spartan Peripheral Devices telephone: (450) 424-6067 • fax: (450) 424-6071 • email: info@spartan-pd.com • website: www.spartan-pd.com

TE151Thermostat
2 May 2008

درباره سازنده

اطلاعات تماس

TE1510 pages

تمام کاتالوگها و بروشورهای فنی شرکت Spartan Peripheral Devices

IRAN INDUSTRY EXPO

خدمات بازرگانی