SNP-G12 Series0 pages

COOP CAMINI-FUOCO-OK GB-FR table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:9.00pt "Arial", sans-serif; } .font2 { font:10.00pt "Arial", sans-serif; } .font3 { font:13.00pt "Arial", sans-serif; } .font4 { font:17.00pt "Arial", sans-serif; } .font5 { font:21.00pt "Arial", sans-serif; } .font6 { font:6.00pt "Arial Black", sans-serif; } .font7 { font:7.00pt "Times New Roman", serif; } SNP-G12 Sries Rated 120W Max 150W Peak 200W kynet THE RELIABLE SOURCE Model Slection Features 2" x 4" footprint High efficiency up to 91% High Power Density up to 11.7W/in3 ITE & Medical models available Built-in Active PFC A c*驯«sCCBF (ITE Models)* Output Rail Min Rated Max Peak* Accuracy* Noise Efficiency SNP-G127 + 12V 0A 10.0A 12.5A 16.7A +11.9V~+12.1V 120mVpp 90% SNP-G128 + 15V 0A 8.0A 10.0A 13.4A +14.9V~+15.1V 100mVpp 90% SNP-G125 + 18V 0A 6.6A 8.3A 11.1A +17.9V~+18.1V 150mVpp 90% SNP-G129 +24V 0A 5.0A 6.3A 8.3A +23.9V~+24.1V 150mVpp 90% SNP-G12G +28V 0A 4.2A 5.4A 7.2A +27.9V~+28.1V 150mVpp 90% SNP-G12J +36V 0A 3.3A 4.2A 5.6A +35.8V~+36.2V 200mVpp 91% SNP-G12T +48V 0A 2.5A 3.1A 4.2A +47.8V~+48.2V 250mVpp 91% General Spcifications Input & Output 闗 EMC ח Input voltage range 90VAC to 264VAC Emission FCC/CISPR, level B Label voltage 100VAC to 240VAC Harmonic currents EN61000-3-2, class D Nominal line voltage 115VAC/230VAC Voltage flicker EN61000-3-3 Input frequency range 47Hz to 63Hz ESD EN61000-4-2, criterion A Inrush current* <30A at 115VAC, <60A at 230VAC 6kV contact, 8kV air discharge Average efficiency* >87% Radiated immunity EN61000-4-3 No load input power <0.5W (fan disconnected) 10V/M with 80% AM, creiterion A Line regulation <±0.5% EFT/Burst EN61000-4-4, 2kV, criterion A Load regulation <±1% Surge EN61000-4-5 Hold-up time 20ms typ. 1kV L-L, 2kV L-E, criterion A Conducted immunity EN61000-4-6 Protection ח 10V with 80% AM, criterion A Over Voltage* Latch-off MS EN61000-4-8, 10A/m, criterion A Over Load/Short Auto-recovery Voltage dips EN61000-4-11 30% dips 10ms, criterion A Environmental ח 60% dips 100ms, criterion C Operating temperature -20oC to +70oC 95% dips 5000ms, criterion C Cooling Convection for rated load 8CFM forced air for max load Safetyח Power derating Refer to Power Derating Curve Approvals 60950-1, 2nd edition (TUV, UL, CSA) Storage temperature -40oC to +85oC 60601-1, 3rd edition (TUV, UL, CSA) Relative humidity 5% to 90% RH, non-condensing CB Report, CE Mark Operating altitude 0 to 3000m MTBF* >0.18Mhr Notes  All specifications without special notices are defined at nominal line, rated load and 25oC. Օ To order medical model, please add suffix "-M" in the end of the ITE model name, e.g. SNP-G127-M.  Initial accuracy is set at 60% rated load and 115VAC input. Օ Peak load can last 2 seconds with 10% duty cycle and average power < 100W.  Ripple & Noise is defined with 20MHz BWL oscilloscope and 1X probe with 0.47uF output capacitor. Օ Inrush current is defined at 25oC cold start and EMI capacitors are excluded.  Over voltage protection mode is defined at 60% rated load. Օ Average efficiency is the average efficiency value of 25%, 50%, 75% and 100% rated load at nominal line input.  MTBF is calculated according to MIL-HDBK-217F at rated load/nominal line input and 45oC ambient temperature. Օ All specifications subject to change without notice.  This datasheet is only for model selection. Please contact sales@skynetpower.com.tw for formal specificaion. Product Manager: Claus Technical Supervisor: Claus Rev. 2011