عضویت 
ورود اعضا
راهنمای خرید
PA 10 Series0 pages
PHOTOELECTRIC AMPLIFIER SERIES
PA 10
Description
ᔢ
Operation mode and max sensing range:
Thru-beam: 0-60 m
Diffuse proximity: 0-4 m
ᔢ
230 V ac, 115 V ac, 24 V ac or 24 V dc
supply voltage
ᔢ
Manual sensitivity adjustment
ᔢ
1 relay or 1 transistor output
ᔢ
Switch selectable light or dark function
ᔢ
Switch selectable long or short range
ᔢ
Power and output indicators
ᔢ
11-pole DIN socket connection
The PA 10 is a 1-channel photoelectric amplifier. The PA 10 A is to be
This amplifier series offers manual sensitivity adjustment via an integral
used in conjunction with a remote transmitter LT and receiver LR from
potentiometer located on the front panel of the amplifier. Output can be
series 101, whilst the PA 10 B is intended for use with series 100, 110,
selected from either a relay or an NPN/PNP transistor output. Light or
and 120.
dark function and long or short range are switch selectable.
Technical Data
Supply voltage
24 V dc, 24 V ac, 115 V ac or 230 V ac
Voltage tolerance
+/– 15 %
Current consumption
Output
Max. 3,2 VA
Relay
1 open / 1 close, 250 V ac / 3 A, 120 V ac / 5 A
Transistor
40 mA / 30 V dc
Alarm output
–
Power on indicator
Green LED
Output indicator
Red LED
Signal level indicator
–
LR sensor failure indicator
–
LT sensor failure indicator
–
Sensor monitor LED drive
–
Hysteresis
Approx. 40 %
Response time tON / tOFF
Relay
10 Hz
Transistor
Operation frequency
12 Hz
Relay
50 ms / 50 ms
Transistor
40 ms / 40 ms
Delay tON / tOFF
–
Housing material
Noryl
Environmental Data
Temperature, operation
–10 to +50 ºC
Temperature, storage
–40 to +80 ºC
Sealing class
IP 40
a b
Approvals
WWW.TELCOSENSORS.COM
d
REMOTE PHOTOELECTRIC SYSTEMS
I 25
"
