Load cells for compression force measurement up to 320kN 0 pages
Technologies for Sensors Indicators and Systems / Druck / Temperatur / Kraft
nn| Force | Pressure | Temperature | Switch
nnCompression force transducers, COMPACT version nnNominal diameter ND20 mm for compression force measurement and for tension or compression force measurement ring formӓ
nnDescription Features
nnThese hydraulic load cells measure and indicate forces directly for a reasonable price. The whole unit (load cell and measuring device) works on the hydraulic principle. Maximum piston stroke is 0.5 mm. for compression forces Օ Nominal temperature range -10 to 50C Е Stainless steel casing and piston >
In accordance with the surface area of the piston, the force acting on it is transferred to the hydraulic fluid and from there via the connecting pipe to the measuring instrument. A ccuracy 1.6% of end scale value when used with pressure measuring instruments class 1.6 and 23հC Maximum piston stroke 0.5 mm Օ Lateral forces within an angel +- 3 can be regarded as negligible >
The straightforward realtionship between the pressure, force and piston surface area enables the scale of the measuring instrument to be graduated in a variety of units, e.g. kN, kg, t, mг or litres. Measurement of axial load and bearing forces in turning and drilling machines as well as extruders Օ Operation without power supply >
Model F1115 The piston of this force transmitter is designed to adapt itself to the face of the piston acting on it up to an angle of approx. +- 3. Modell F6116 This transducer is used if it is necessary to led a shaft through the measuring body.
Measuring ranges
Е 0.2 ... 120 kN >
For precise conversion of force into pressure the force must act vertically and centred on the piston which must not be subject to lateral forces.
Applications
Plant engineering >
The load cells are unsuited, or suited only to a limited extent, to the measurement of impact or acceleration. Provided that the frequency is not too high, oscillating forces can also be measured with hydraulic load cells. In such case a measuring unit with a rather large working range is advisable in the interests of prolonging service life. Օ Production lines Measuring and test equipment Օ Special mechanical engineering applications >
Note
nnHydraulic measuring devices are filled with hydraulic fluid in a vacuum environment. For this reason a guarantee of proper functioning is only given on fully assembled units. Sealing glands must not be loosened or removed. Model: F1115, F6116 tecsis GmbH DD 1 8 / 4 Tel.: +49 69 5806-0 Fax: +49 69 5806-170 Fax: +49 69 5806-177 Internet: www.tecsis.de 12 e Carl-Legien-Str. 40 D-63073 Offenbach/Main Sales national Sales international e-Mail: info@tecsis.de p. size="-2">
"