Hydraulic load cells for compression force measurement and for force measurement in welding brackets 0 pages

"

Technologies for Sensors Indicators and Systems / Druck / Temperatur / Kraft

nn

| Force | Pressure | Temperature | Switch

nnCompression force transducers with small dimensions for measurements in welding guns/ measurements in gaps nn

Description Features

These hydraulic load cells measure and indicate forces directly for a reasonable price. The whole unit (load cell and measuring device) works on the hydraulic principle. for compression forces Օ for force measurement in welding brackets In accordance with the surface area of the piston, the force acting on it is transferred to the hydraulic fluid and from there via the connecting pipe to the measuring instrument. Ambient temperature -20 to 60հC Stainless steel casing and piston Օ Accuracy 1.6% of end scale value when used with pressure measuring instruments class 1.6 and 23C Е Maximum piston stroke 0.5 mm The straightforward relationship between the pressure, force and piston surface area enables the scale of the measuring instrument to be graduated in a variety of units, e.g. kN, kg, t, m or litres. ӕ Operation without power supply >

nn

Measuring Range

Maximum piston stroke is 0.5 mm. 250 ... 36 kN For precise conversion of force into pressure the force must act vertically and centred on the piston which must not be subject to lateral forces. >

nn

Applications

Օ Plant engineering The load cells are unsuited, or suited only to a limited extent, to the measurement of impact or acceleration. Provided that the frequency is not too high, oscillating forces can also be measured with hydraulic load cells. In such case a measuring unit with a rather large working range is advisable in the interests of prolonging service life. Production lines Օ Measuring and test equipment Special mechanical engineering applications >

nn

Note

Hydraulic measuring devices are filled with hydraulic fluid in a vacuum environment. For this reason a guarantee of proper functioning is only given on fully assembled units. Sealing glands must not be loosened or removed. >
Model: F1101, F1102 tecsis GmbH DE 1 8 / 3 Tel.: +49 69 5806-0 Fax: +49 69 5806-170 Fax: +49 69 5806-177 Internet: www.tecsis.de 14 a Carl-Legien-Str. 40 D-63073 Offenbach/Main Sales national Sales international e-Mail:info@tecsis.de p. size="-2">

"