2D0 pages

2D CUTTING HEAD CONFIGURATION
RPN 1046488

The 2D cutting head has a long-life
mixing chamber and only two wear
parts: the water nozzle and the abrasive mixing tube.
The cutting table’s bridge has 1 or 2* cutting heads, each mounted on a carriage
plate. The carriage plates are provided
with direct-drive linear motors, enabling
fast and easy setting of the correct distance between both cutting heads from
the operator console. This distance varies from 350 mm to 1500 mm.
The ACM 3000-series machines also
have a special feature: While using
2 cutting heads, the effective cutting
range for 1 head remains 3000 mm in a
2D-cutting position.

ELECTRONIC FEEDER
To optimize cutting speed and quality each cutting head is connected to
an electronic abrasive dosing system
(feeder) located on each cutting head’s
carriage and containing a small integrated buffer to ensure reliable, consistent and continuously variable abrasive
addition.
ttt

KEY FEATURES
1 Abrasive and pure water compatible
2 Modular design
3 Highly accurate
4 Compact solution

KEY SPECIFICATIONS
ORDERING CODE
RPN 1048094

+31 (0) 50 501 6877
wjsales@resato.com
www.resato.com

1 Maximum working pressure : 4000 bar
2 Pneumatic valve, normally closed
3 Water nozzle : 0.25 mm
4 Abrasive mixing tube : 0.8 mm