2.5D0 pages
2.5D CUTTING HEAD CONFIGURATION
RPN 1048094
The 2.5D cutting head is designed to
cut bevel parts from sheet material.
Two additional servo controlled axis
are added to the standard XYZ axis
creating a five-axis machine. In order
to achieve a practical application a
height sensor is integrated.
The integrated high torque frameless
servo motors with hollow shafts are
the core of this unique construction. Using the direct drive principle means a
minimum of moving parts resulting in a
compact, highly accurate, fast responding and maintenance-free solution.
The cutting head can be tilted up to 55º,
the practical limit when cutting a 45º
bevel corner in an 90º contour angle.
EMS SYSTEM
Intended particularly for unmanned
ACM operation, the electronic feeder is
provided with the EMS electronic management system. Used with the cutting
head it allows all key cutting parameters to be controlled. The EMS management system promptly detects a defective water nozzle or any stoppage in the
abrasive feed, raises an alarm and can
automatically stop the cutting process if
required.tttt
ORDERING CODE
RPN 1048094
+31 (0) 50 501 6877
wjsales@resato.com
www.resato.com
KEY FEATURES
1 Abrasive and pure water compatible
2 Modular design
3 Highly accurate
4 Compact solution
KEY SPECIFICATIONS
1 55 tilt angle
°
2 45° bevel corner
3 ACM backwards compatible