LOADING
آکومولاتور مدار تبرید
1.9 - 21.8 lbs, max. 450 psi | S-70xx series
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت Henry Technologies در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
-
Application:
for refrigeration circuits
The function of a Suction Line Accumulator is to provide temporary
storage and controlled return of liquid refrigerant and oil to protect
the compressor from damage by sudden surges of liquid.
Applications
Suction Line Accumulators are installed in air conditioning and refrigeration
systems where sudden return of liquid down the suction line is possible.
Suction Line Accumulators are designed to meter both liquid refrigerant and
oil back to the compressor at a controlled rate. In addition to protecting the
compressor from damage, the Accumulator helps maintain system efficiency
and proper crankcase oil levels.
The Heat Exchanger models are designed to be used on low temperature
systems to sub-cool the liquid line. Passing the liquid line through the heat
exchanger coil on the Accumulator also helps to boil off liquid refrigerant in
the Accumulator. Heat Exchanger models can help to improve system
efficiency while helping oil flow in the suction line. To avoid overheating the
compressor, do not use discharge gas through the heat exchanger coil.
The Heat Pump models are designed to be used on heat pump systems
where winter heating can cause an increased amount of liquid refrigerant
return. The Heat Pump models incorporate a smaller orifice to prevent
excessive liquid flow back to the compressor.
Henry TechnologiesÂ’ Suction Line Accumulators are suitable for use with
HFC and HCFC refrigerants and their associated oils, as well as other
industrial fluids non-corrosive to steel and copper.
storage and controlled return of liquid refrigerant and oil to protect
the compressor from damage by sudden surges of liquid.
Applications
Suction Line Accumulators are installed in air conditioning and refrigeration
systems where sudden return of liquid down the suction line is possible.
Suction Line Accumulators are designed to meter both liquid refrigerant and
oil back to the compressor at a controlled rate. In addition to protecting the
compressor from damage, the Accumulator helps maintain system efficiency
and proper crankcase oil levels.
The Heat Exchanger models are designed to be used on low temperature
systems to sub-cool the liquid line. Passing the liquid line through the heat
exchanger coil on the Accumulator also helps to boil off liquid refrigerant in
the Accumulator. Heat Exchanger models can help to improve system
efficiency while helping oil flow in the suction line. To avoid overheating the
compressor, do not use discharge gas through the heat exchanger coil.
The Heat Pump models are designed to be used on heat pump systems
where winter heating can cause an increased amount of liquid refrigerant
return. The Heat Pump models incorporate a smaller orifice to prevent
excessive liquid flow back to the compressor.
Henry TechnologiesÂ’ Suction Line Accumulators are suitable for use with
HFC and HCFC refrigerants and their associated oils, as well as other
industrial fluids non-corrosive to steel and copper.