LOADING
حامل کابل
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت HESTEGO در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
IDEALFLEX Cable Carriers
It is a closed cable carrier made of galvanized sheet, which consists of a carrying section and a steel guiding strip which is connected to one of the four sides of this section. This enables only a one-way bend to the side of the steel strip. Bends in the other directions are disabled. It is proven by load tests that nor after 10 million cycles are the cables damaged nor is the flexible carrier worn.
IDEALFLEX meets the technical and safety regulations and complies with the DIN 57113/VDE 0113 standards.
The cable carrier is also resistant to all cooling liquids and lubricants commonly used with machine tools.
Attachment
On both ends of the section, there are stubbed or riveted on flanges which can be attached by several ways. (See the table.)
Cables and hoses which are laid loose in the section must be fixed to both ends of the carrier. To ensure the maximum service life of IDEALFLEX, it is necessary to provide its support or guiding in a channel if the section is long. The length of the channel should be equal to at least a half of the length of elevation. The most suitable attachment of the end of a cable carrier is in the middle of the elevation distance. In this way the shortest length of the carrier and the lowest price can be achieved.
-RM quality (for a low rate of movement) to 20 m/min IDEALFLEX with a steel guiding strip.
- RS quality (for a medium rate of movement)
20 to 50 m/min
IDEALFLEX with a steel guiding strip glued with a special adhesive.
- RV quality (for a high rate of movement) over 50 m/min IDEALFLEX with a synthetic guiding strip glued with a special adhesive
It is a closed cable carrier made of galvanized sheet, which consists of a carrying section and a steel guiding strip which is connected to one of the four sides of this section. This enables only a one-way bend to the side of the steel strip. Bends in the other directions are disabled. It is proven by load tests that nor after 10 million cycles are the cables damaged nor is the flexible carrier worn.
IDEALFLEX meets the technical and safety regulations and complies with the DIN 57113/VDE 0113 standards.
The cable carrier is also resistant to all cooling liquids and lubricants commonly used with machine tools.
Attachment
On both ends of the section, there are stubbed or riveted on flanges which can be attached by several ways. (See the table.)
Cables and hoses which are laid loose in the section must be fixed to both ends of the carrier. To ensure the maximum service life of IDEALFLEX, it is necessary to provide its support or guiding in a channel if the section is long. The length of the channel should be equal to at least a half of the length of elevation. The most suitable attachment of the end of a cable carrier is in the middle of the elevation distance. In this way the shortest length of the carrier and the lowest price can be achieved.
-RM quality (for a low rate of movement) to 20 m/min IDEALFLEX with a steel guiding strip.
- RS quality (for a medium rate of movement)
20 to 50 m/min
IDEALFLEX with a steel guiding strip glued with a special adhesive.
- RV quality (for a high rate of movement) over 50 m/min IDEALFLEX with a synthetic guiding strip glued with a special adhesive