LOADING
نگهدارنده بار هیدرولیکی
max. 180°
چگونه این محصول را خریداری کنم؟
درخواست قیمت
درخواست مشاوره و مدارک فنی
پرسش
خدمات خرید VIP
شما می توانید از سرویس رایگان نمایشگاه استفاده نموده و درخواست خود را مستقیما به شرکت سازنده ارسال نمایید و پس از دریافت قیمت و با ورود اطلاعات به " ماشین محاسبه قیمت ریالی " از قیمت ریالی کالا بصورت تخمینی مطلع شوید . اگر مایلید مکاتبه با شرکت سازنده ، تبادل اطلاعات و دریافت قیمت ارزی و ریالی توسط کارشناسان این مجموعه انجام شود لطفا از این طریق اقدام فرمایید. استفاده از این سرویس مستلزم پرداخت هزینه است . برای دریافت اطلاعات بیشتر با تلفن 41995 تماس حاصل فرمایید.
ادامه
ادامه
در صورتی که قیمت ارزی محصول را در اختیار دارید پس از عضویت و ورود به سایت می توانید فرم مربوطه را تکمیل و به همراه تصویر پرفورمای شرکت سازنده ارسال نمایید تا کارشناسان ما در اسرع وقت نسبت به محاسبه هزینه های حمل و ترخیص و صدور پیش فاکتور ریالی اقدام نمایند. هزینه استفاده از این سرویس برای هر درخواست 25 یورو می باشد. صنایع معظم در صورت تمایل به استفاده از این خدمات می توانند بدون نیاز به عضویت و پرداخت هزینه درخواست خود را به همراه کپی پرفورمای شرکت سازنده به ایمیل enquiry@iranindustryexpo.com و یا فاکس 88206264 بنام شرکت مهندسی و بازرگانی مشگاد ارسال نمایند.
در صورت عقد قرار داد مبلغ دریافتی به حساب خریدار عودت می شود.
ادامه
افزودن به لیست علاقه مندی ها
سایر سازندگان این محصول
درخواست قیمت ریالی
اگر مجموعه شما جزو صنایع مادر و معظم در فیلد پالایشگاه ، پتروشیمی ، حفاری ، نیروگاه ، معادن و فلزات ، خودروسازی ، تولید مواد غذایی و دارویی و.... می باشد لطفا درخواست خود را بر روی سربرگ به فاکس 88206264 و یا ایمیل enquiry@iranindustryexpo.com بنام شرکت مهندسی و بازرگانی مشگاد ارسال فرمایید.
کارشناسان این مجموعه در اسرع وقت با شما تماس خواهند گرفت .
بازدیدکننده محترم، از اینکه سایت ایران اینداستری را برای منابع یابی انتخاب کرده اید، از شما سپاسگزاریم.
اطلاعاتی برای نماینده شرکت CBE Group در ایران یافت نشد.
لطفا با انتخاب هر یک از بخش های فوق، درخواست خود را ارسال فرمایید تا توسط واحد بازرگانی ایران اینداستری اکسپو بررسی شود.
مشخصات فنی
-
Operation:
hydraulic
The turning machine 180° is composed of a steel frame equipped with supports allowing to place the concrete segment. Two lateral jaws hold the segment in the frame. The movement of these jaws is made by hydraulic cylinders equipped with safety valves flange connected to the cylinder body to avoid any risk of falling in case of hose break.The frame of the turning machine rests on two brackets equipped with bearings allowing its rotation of 180°. The movement is made by a set of rack/pinion equipped with a hydraulic cylinder.
This system is mounted on each side of the frame.To avoid any desynchronization during rotation, these two cylinders have balancing valves.The upward/downward movement of the frame allows placing the segment rotated by 180° on the first position of the transfer line.This movement is made by two hydraulic cylinders equipped with a safety non-return valve controlled electrically and a flow divider to balance the downward movement of the frame. All these movements are controlled from the automatism device in the control panel. Position sensors control the different positions.The power is supplied by a hydraulic station of 9 to 11 kW located on the turning machine side.
Function
The operation of the turnover machine will take place within the same cycle time as the carrousel.
The installation can operate manually or automatically.Automatically, the forward cycle is carried out as soon as the operator has advised the staff on the line by a sound alarm, pressed on the cycle start button.
The cycle of the turning machine is automatically carried out as soon as a piece is present on its step for turning.
This system is mounted on each side of the frame.To avoid any desynchronization during rotation, these two cylinders have balancing valves.The upward/downward movement of the frame allows placing the segment rotated by 180° on the first position of the transfer line.This movement is made by two hydraulic cylinders equipped with a safety non-return valve controlled electrically and a flow divider to balance the downward movement of the frame. All these movements are controlled from the automatism device in the control panel. Position sensors control the different positions.The power is supplied by a hydraulic station of 9 to 11 kW located on the turning machine side.
Function
The operation of the turnover machine will take place within the same cycle time as the carrousel.
The installation can operate manually or automatically.Automatically, the forward cycle is carried out as soon as the operator has advised the staff on the line by a sound alarm, pressed on the cycle start button.
The cycle of the turning machine is automatically carried out as soon as a piece is present on its step for turning.