PT600R Advanced Function Digital Indicator0 pages

Innovative Measurement Electronics

MULTI FUNCTION WEIGHT INDICATOR
PT600R
The PT600R series indicators feature a totally new
design concept combined with many important
technological improvements that are totally new to
the weighing industry.
The exceptionally large LCD display (29mm main
digits) is complemented by super-bright LED
backlighting to ensure easy reading in all lighting
conditions (including bright sunlight).

Power Supply

Back Shell & Desk Stand

APPLICATIONS

Single Module

The silicone keypads offer superb feedback with
a precise soft-touch operation. There are three
assignable function keys to alleviate confusion when
performing special keystroke operations.

FEATURES

Weighbridges

12 ~ 24V DC

Accepts optional modules

Platforms

16 x 350Ω cells

Adjustable printing formats

Counting

Totalising & counting

Transorb protected L/C input

Totalising

On-board serial outputs

Adjustable conversion factors

Materials Testing

LARGE multi-line display

Batching & grading

SPECIFICATIONS
Due to PT’s policy of continuous development, these specifications are subject to change without notice.

Resolution _______ Up to 100,000 Divisions. Minimum of 0.25µV/Division
Zero Cancellation ________________________________________± 2mV/V
Span Adjustment ________________________________0.1mV/V ~ 3mV/V
Stability/Drift ________________ Zero < 0.1µV/°C (+8ppm Deadload Max)
Span < 8ppm/°C
Linearity < 20ppm
Noise < 0.2µVp-p
Excitation ___________ 7.4V for up to 16 x 350 or 32 x 700Ω Load Cells
(4-wire or 6-wire plus shield)
Maximum Total Load Cell Resistance: 1,000Ω
A/D Type _________ 24bit Sigma Delta with ± 8,388,608 Internal Counts
Operating Environment ______________-10 ~ 50°C Ambient Temperature
< 90% Non-Condensing Humidity
-20 ~ 50°C Ambient Storage
IP55 when panel mounted, or with rear boot (otherwise IP40)
Case Materials ___ ABS, Silicone Rubber, Nylon, Acrylic (no halogen used)
Packing Weights _______________________________Basic Indicator 0.6kg
Battery Backed Clock Calendar _________ Battery Life 10 Years Minimum

LCD with 4 Alpha-numeric Displays _______________________ LED Backlit
Primary Display: 6 x 28.4mm High Digits With Units & Annunciators
2nd Display: 9 x 17.6mm digits with units
3rd Display: 8 x 6.1mm digits
4th Display: 4x7.6mm digits
Setup & Calibration _____ Full Digital. Visual Prompting In Plain Messages
Digital Filter _______________ Sliding Window Average 0.1 ~ 30 seconds
Zero Range ______________________ Adjustable ±2 ~ 20% Full Capacity
Standard Power Input _____________________12 ~ 24V DC (15 VA max)
ON/OFF Key With Memory Feature
Variants __________110/240V AC 50/60HZ Input 12V DC 15VA Output
Optical Data Communications ____________ Magnetically coupled optical
communications support with opptional conversion cable
which connects directly into a standard RS-232 Port
Correction _____________________________ Ten Point Linearity Correction
Serial Outputs (Standard) ______ RS-485 transmit only for remote display
RS-232 serial port for remote display, network or printer supports
Transmission rate: 2400, 4800, 9600 or 19200 Baud
Assignable Funcion Keys _____________Printing, Unit Switching, Counting,
Manual Hold, Peak Hold, Totalising

http://www.pt-global.com