empc_a5000 pages
emPC-A500
Fanless Embedded System
With Lowest Dimensions
Features
Processor
ARM Cortex A8: Freescale i.MX515 with 600 MHz
2 x 32 kB L1 cache, 256 kB L2 cache
Vector floating point co-processor
CAN
SJA 1000 CAN Controller
Physical Layer ISO/DIS 11898-2, isolated from logic
Bus termination is software switchable, 120 Ω resistor
Memory
Expansion
System memory 256 MB DDR2-RAM
Boot Flash 2 MB, with u-boot
iX-Bus 8/16 bit interface for I/O and low speed peripherals
NVRAM 32 kB (battery free solution)
Internal storage medium Compact Flash socket, Type I/II
Power Supply
Input 9..32 V DC
Power consumption tbd
Video
OpenGL® ES2.0 and OpenVGTM 1.1 accelerator
24 bit display support up to WXGA resolution
15-pin VGA graphic interface on front panel
Single channel LVDS on internal connector
Clocks and Timers
Secure Real Time clock (coin cell battery needed)
Watchdog timer
Interfaces
2 x 9-pin D-SUB connectors for CAN or serial ports
version /0: 2 x RS232 serial interface or
version /1: 1 x CAN and 1 x RS232 or
version /2: 2 x CAN/CANopen interface
2 x 10/100 Mbit/s Ethernet
2 x USB (V 2.0), with 500 mA power supply capability
15-pin D-SUB VGA port
Receptable for power supply
Reset push button
Status LED for power supply status
Physical
Ambient operating temperature range 0 °C…60 °C
Non-operating temperature range -20 °C…75 °C
Humidity 0 % ~ 80 %, non-condensing
Dimensions (w x h x d): 105 x 49 x 104 mm
Weight approx. 0.5 kg
Options
CoDeSys IEC61131-3 runtime environment
Extended operating temperature range from
-30 °C … 70 °C.
Supported Operating Systems
WES 7, Windows CE.NET 5.0/6.0, Linux;
other operating systems on request…
For special Windows CE images contact your regional
Janz Tec sales office.
Copyright © 2012 Janz Tec AG.
All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Janz Tec and the Janz Tec logo are registered trademarks of Janz Tec AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications
are subject to change without notice. For detailed information please have a look in the respective user‘s manual.
Status 2012/10