CAN-CP6/K20 pages
CAN
Intelligent and Modular
CAN/CANopen Interface
For 6 U CompactPCI
CAN-CP6
Features
CAN-CP6 is built with CMOD-IO and VMOD-ICAN3 hardware
PCI Interface
• 6 U CompactPCI form factor
• 32 bit PCI V 2.2 target interface
• 3.3 V/5 V compatible
• 33 MHz bus clock frequency
• Only one 6 U CompactPCI slot needed
CAN/CANopen
Powerful MC68332 controller with 20 MHz
• 128 kB Flash EPROM, 16 bit wide
• 256 kB SRAM, 16 bit wide
• 64 kB DP SRAM, 16 bit wide
• 1 Phillips SJA1000 CAN controller
• 11 bit ID and 29 bit ID CAN specifications supported
• ISO/DIS 11898-2
• 9-pin D-SUB connector at front panel
• CAN bus termination 120 Q software switchable
• Compatible to CAN Specification 2.0 b
Physical
• Power requirements +5 V (±5 %), max. 600 mA
• Operating temperature range 0... 70 °C
• Non-operating temperature range -20 °C...75 °C
• Humidity 0 ... 80 %, non-condensing
• Dimensions (wx d) 160 x 233 mm
Options
• Isolated CAN, 500 V isolation barrier
• Up to 4 CAN interfaces
Supported Operating Systems
• Windows, Windows CE, Linux, QNX, VxWorks
Ordering Information
CAN-CP6/K2 CB-FCA-32000
CAN-CP6 with one VMOD-ICAN3 CAN Controller
CAN-CP6/K20 CB-FCA-32002
CAN-CP6 with one VMOD-ICAN3/0 CAN Controller
VMOD-ICAN3 BO-FMB-34072
MODULbus CAN/CANopen mezzanine module
VMOD-ICAN3/0 BO-FMB-34073
MODULbus CAN/CANopen mezzanine module
CANopen/ML CB-SOF-32051
CANopen Run Time License for intelligent CAN interfaces
Software Development Kit
Contact your Janz Tec sales offices for more information!
Contact Information
Janz Tec AG
Im Doerener Feld 8
33100 Paderborn
Germany
Phone +49.52 51.15 50.100
Fax +49.52 51.15 50.190
E-Mail sales@janztec.com
Web www.janztec.com
Copyright © 2011 Janz Tec AG
All rights reserved. Printed in Germany. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate; however, no responsibility is assumed for
naccuracies. Janz Tec and the Janz Tec logo are registered trademarks of Janz Tec AG. All other brand or product names are trademarks or registered trademarks or copyrights by their respective owners and are recognized. Specifications
are subject to change without notice. For detailed information please have a look in the respective user's manual
Status 2011/08
"