CLX0 pages
lib
nnnnWater Quality Measurement Solutions
nnnnA Watts Water Technologies Company
nnnnOnLine Residual Chlorine Monitor
nnnnThe HF scientific QZXI OnLine Residual Chlorine Monitor is an economical and low maintenance
nnnninstrument for chemical or industrial processes that require continuous monitoring and control of residual
nnnnFree or Total Chlorine levels. User selectable cycle times, 4-20mA and RS-485 with Modbus output that
nnnncan be used to control feed pumps and user selectable alarms allow complete manual or automatic control
nnnnof chlorine dosing. The instrument is housed in a strong, shatterproof case with easy access to all service
nnnnfunctions and reagents
nnnnHigh range model now
nnnnavailable (0 - 15mg/l)!
nnnnStandard Features
nnnnSpecifications
nnnn• Free or Total Chlorine
nnnnCan be used for Free or Total Chlorine measurements
nnnn• Low Operating Costs
nnnnLow Reagent use translates into low operating cost
nnnn• Simple Operation
nnnnDesigned for unattended operation up to 30 days
nnnn• Colorimetric DPD Chemistry
nnnnUses inexpensive DPD chemistry rather than expensive electrodes
nnnn• User Selectable Cycle Times
nnnnCycle times can vary between 110 seconds to 10 minutes (optional 60
nnnnseconds to 10 minutes)
nnnn• Microprocessor Based Technology
nnnnMicroprocessor based technology ensures high quality at the industry's
nnnnlowest price
nnnn• Alarms
nnnnTwo User Selectable Alarms for Sample Concentration
nnnn• Drinking Water, Wastewater and More
nnnn• 4-20mAand RS-485 with Modbus
nnnn• USEPA Accepted Methodology
nnnnStandard Method 4500-CI G, DPD colorimetric method
nnnn• Certifications
nnnnLloyds Register Test Specification for Vibration and 22 Degree Tilt Test
nnnnEn 60954: 2002 Section 8.2, 8.4, 8.7, Specification test No1: Section 14
nnnnEC 6-parameter Environmental Marine Test for high humidity, high
nnnntemperature (86°C), low temperature (-5°C), salt spray
nnnn• Certified byABS (American Bureau of Shipping) for marine use
nnnnOrdering Information
nnnnCat. No. Description
nnnn20040
nnnnCDC OnLine Chlorine Residual Monitor for Free or Total Chlorine.
nnnnComplete with Operating Manual. Reagents must be purchased
nnnnseparately. If the application combines high humidity with cold
nnnnsample water, purchase a #09944 Desiccant Cartridge separately.
nnnnAccessories
nnnn09950
nnnnReplacement tubing/cuvette kit
nnnnRange: | 0-10 mg/l |
Cycle Time: | User Selectable: 110 seconds -10 minutes Optional: 60 seconds -10 minutes |
Accuracy: | 0 - 6 mg/l - ±5% or 0.03 mg/l of CI2 whichever is greater 6-10 mg/l - ±10% |
Resolution: | 0.01 mg/l |
Method: | USEPA accepted DPD method of analysis for measuring Free or Total Residual Chlorine |
Standard Outputs: | 4-20 mA and RS-485 with Modbus |
User Alarms: | 2 User Selectable Alarms for Sample Concentration |
Operating Temperature: | See note below* |
Input Pressure: | 0.3 bar -10.3 bar (5 -150psi) |
Enclosure: | ABS Plastic, IP66 |
Power: | 100 - 240 VAC Auto Switchable 47-63hz |
Certifications: | CE.UL, CSA, (ETL, ETLc) |
Shipping Dimensions: | 16" x 16" x 10" (41 cm x 41 cm x 26cm) |
Shipping Weight: | 8 lbs (3.6kg) |
Actual Weight: | 6 lbs (2.7kg) |
Installed Dimensions | 12.82" x12.25" x 5.06" |
Flow Rate to Waste: | 200-400 ml/min |
Specifications subject to change without notice.
nnnn* Operating temperature of CLX Monitor 0° - 55°C
nnnnOperating temperature for 30-day reagent life 0° - 40°C
nnnnReagent life will be <30 days operating monitor above 40°C
nnnnCat. No.
nnnnKit Reagents
nnnnFree Chlorine 30 day supply
nnnnTotal Chlorine 30 day supply
nnnnFree Chlorine 60 day supply
nnnnTotal Chlorine 60 day supply
nnnnFree Chlorine 12 month supply
nnnnTotal Chlorine 12 month supply
nnnnJ.A.W*
nnnn09951
nnnn09952
nnnn09953
nnnn09954
nnnn09955
nnnn09956
nnnnDry**
nnnn09947X
nnnn09948X
nnnnN/A
nnnnN/A
nnnn09937X
nnnn09938X
nnnnLiquid
nnnn09947
nnnn09948
nnnn09935
nnnn09936
nnnn09937
nnnn09938
nnnn3170 Metro Parkway, Ft. Myers FL 33916 e-mail: hfinfo@watts.com
nnnnph: (239)-337-2116 • fax: (239) 332-7643 • toll free: 888-203-7248 WWW.hfscientific.com
nnnn*Just Add Water (and supplied DPD reagent)
nnnn"User must add Sulfuric Acid, Sodium Hydroxide
nnnnand DPD reagent before use
nnnnCCDC
nnnnwith cover
nnnnremoved showing
nnnnL reagent bottles
nnnnRev. 11-17-2011
"