Filter Bags0 pages

Phone: 760.929.8559 >

1.800.634.8537 >

׷

Carlsbad, California 92008 >

Fax: 760.929.1901 >

׷

www.standardfilter.com5928 Balfour Court >

A wide variety of reverse air bag types can be designed andmanufactured. Typical top designs are strap top, loop top, cord
top cuff, compression band tops with steel caps or grommet top
bags. Bottom designs can be raw edge, cuffed, compression
band or beaded cuff.Anti-collapse rings of mild steel, stainless steel and other alloyscan be placed along the bag at the proper points for maximum
cleaning efficiency . Standard Filter can also supply clamps for thecuff bottoms.See the enclosed brochure for clamp sizes.
Standard Filter manufactures pulse-jet and plenum pulse filterbags. These bags use support cages to allow air flow from the
exterior of the bag and exiting through the interior.Our bags are sewn with 3 - needle chain stitch to insure seamintegrity. Top constructions consist of snap band, flange top, ringtop, soft cuffs or raw edge. Bottom removal bags are constructed
with a raw top or soft cuff. Top and bottom removal bag bottoms
have disc bottoms that can be sewn using an overlock (surge)
stitch or lock stitch. We can also provide a wear strip or custom
skirts to the bottom portion of the bag to prevent premature wearfrom bag-to-bag and bag-to-cage abrasion.We provide a wide variety of filter bags for use in shaker typecollectors. We manufacture bags from wovens and shakerfelts.Standard Filters engineering department can recommend themedia that will give you the performance you expect from yourshaker unit.We offer various types of top attachments to work with the shakermechanism you have, whether itҒs loop, hanger, strap, grommet orwe may help you design one to fit your needs. Our bottomattachments can be made with snapbands, corded cuffs or
reinforced cuffs for extra wear protection.We can also supply
clamps for the standard cuff bottoms, as well as other hardware.