Switch Mode Sealed Lead Acid Battery Chargers0 pages

Model Nominal
Voltage
Output Voltage
Float/Fast Charge
Output
Current
mA
Type
Automatic
Dimensions: in. (mm) Weight Charger
Length Width Height lbs. kgs. Design
PSC-6300A-C 6 6.75 / 7.35 300 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in
PSC-6500A-C 6 6.75 / 7.35 500 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in
PSC-61000A-C 6 6.75 / 7.35 1000 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in
PSC-64000A-C 6 6.75 / 7.35 4000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top
PSC-12300A-C 12 13.50 / 14.70 300 dual rate 2.05 (52) 1.57 (40) 2.64 (67) 0.21 0.10 Plug-in
PSC-12500A-C 12 13.50 / 14.70 500 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in
PSC-12800A-C 12 13.50 / 14.70 800 dual rate 2.24 (57) 1.73 (44) 3.23 (82) 0.30 0.14 Plug-in
PSC-122000A-C 12 13.50 / 14.70 1800 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top
PSC-124000A-C 12 13.50 / 14.70 4000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top
PSC-1210000A-C* 12 13.50 / 14.70 10000 dual rate 8.80 (224) 5.17 (131) 3.33 (85) 4.30 1.95 Desk Top
PSC-241000A-C 24 27.00 / 29.40 1000 dual rate 5.43 (138) 2.83 (72) 1.65 (42) 0.90 0.41 Desk Top
We’ve Got The Power.™
Specifications
Features Operating Characteristics
Note: All plug-in design have 39” (1m) leads. All desktop design have 59” (1.5m) input leads and 39” (1m) output leads.
• I.C. based voltage and current regulation designed for
sealed (valve-regulated) lead-acid batteries
• Useable on domestic and overseas input voltages
from 110VAC - 60Hz to 240VAC - 50Hz, except for the
PSC-1210000A-C, see charger selection guide
• Automatic, current sensing dual-rate charging for
efficient, care-free and safe operation
• L.E.D.s indicate ‘power on’ and “FAST” and “FLOAT”
charging modes
• Lightweight wall mounted plug-in or desk top design
with screw type output terminals, depending on output
current
• Connectors to the battery are alligator clips with
insulated sleeves
• Protected against accidental reverse polarity connection
• U.L. and European C.E. approval
“A-C” series chargers are new “switching” type devices
which operate without the use of transformers. I.C.’s control
and regulate current and voltage and automatically switch
from the higher fast charge voltage to the lower float
voltage when batteries are very close to being fully charged.
At the float voltage it is safe to leave the battery connected
to the charger indefinitely, making charging pretty much
fool-proof.
In the fast charge mode voltage goes up to 2.45V +/- 0.05V
before switching, in the float charge mode voltage is held
between 2.25- 2.30V/cell.
This charger is ideal for cyclic applications where recharge
time is critical and timely charge termination cannot
be counted on. This charger ensures optimum battery
performance & service life.
C-SERIES SWITCH-MODE CHARGERS
FOR SLA BATTERIES