ADS E 7440 pages

PITOT / STATIC / AoA TESTER ADSE 744
→
→
→
→
→
→
→

Main Features

ALTIMETERS TESTING
AIRSPEED INDICATORS TESTING
VERTICAL SPEED INDICATORS TESTING
AIR DATA COMPUTERS TESTING
PRESSURE SENSORS TESTING
AoA TESTING FOR SPECIFIC PROBES
LEAK TESTER

• Built-in pressure and vacuum pumps
• Liquid crystal colour display with touch sensitive screen for operator instructions/help
• Remote control unit based on Windows CE tablet PC
• Complete self check of set before use
• High accuracy, high resolution
• RVSM compliant
• Programmable leak test
• Programmable flight envelope to protect equipment under test
• All four primary flight parameters displayed simultaneously
• Programmable (password write protected) test schedules
• Selectable pressure units : hPa; mb; in Hg; mmHg; ft; m; kts; km/h, ft/min; hm/min, Mach number

RVSM COMPLIANT

General details
Temperature range
Power supply
Case
Physical
Calibration
Ease of Use
Ease of maintenance

Operating -10° to 50°C (14° to 122°F)
Storage -20° to +60°C (–4° to 140°F)
90/240V, 50 to 400Hz AC, 150VA
Completely weatherproof, meets EMC requirements
MIL STD 462D
515x380x270mm (20.3 x 15 x 10.6 inch) - 17kg (38 lbs)
Recommended period 12 months
Remote touch screen
Integrated bag for cables and hoses
Maintenance limited to calibration, regular external cleaning
and exchange of filters (with the calibration)

Optional
DC Power supply: 17 to 32V DC
Low range Pt sensor: 350 kts max for better accuracy
Remote Control Software for PC (Windows CE)

The ADSE 744 is the new comer of our broad range
of pitot and static testers. This tester was specifically
designed for the new-generation pitot tubes that
integrates sensing probes, pressure sensors and
powerful air data computer processing to provide all
critical air data parameters including Pitot and static
pressure, airspeed, altitude, and angle of attack.
This Pitot Static tester is designed primarily for
flightline use to cover the testing of all barometric
and manometric pressure instrument systems.
The AoA Channel behaves as a second Ps channel,
in order to create a differential pressure between
the 2 Ps Channel, allowing to perform simulations
of different Angles of Attack. The large touch screen
display, with on-screen help, enables all checks to
be carried out easily on the flight deck or in the
cockpit, by a single operator. The ADSE 744 is
robust and housed in a mobile weatherproof case.
An attached bag contains the pressure hoses and
electrical cables. Wide choice of pneumatic
connectors can be supplied on demand.

Measurement specification in standards conditions
Function
Altitude

Range
-2,300 to 60,000ft
(up to -4,000ft to 80,000ft optional)

Altitude rate
Indicated
airspeed

+ 0 to 6,000ft/min
—
10 to 800kts
(up to 1000 kts optional)

Mach N°
Static sensor
Pitot sensor
AoA sensor

0.1 to 4.0 Mach
30 to 1200 mbar
30 to 3000 mbar
30 to 1200 mbar

Accuracy
+ 1.5ft at 0ft
—
+ 4ft at 30,000ft
—
+ 16ft at 60,000ft
—
+ 1%
—
+ 1kt at 50kts (+ 0.5kts at 50kts optional)
—
—
+ 0.2kt at 350kts (+ 0.1kts at 350kts opt.)
—
—
+ 0.04kt at 650kts
—
+ 0.001M at 0,8M/25,000ft
—
0,01% FS
0,01% FS
0,01% FS

- Continuiting development sometimes necessitates specification changes without notice.
- Special options can be analyzed and developped on request.

5

ADSE 744

Typical screen display

ATEQ Omicron - Test instruments for all aircrafts

H A N G A R / TA R M A C

AoA TESTING HAS NEVER BEEN MADE SO EASY