High Pressure Pumps

STREAMLINE SL-VI
The right solution for every application
With the introduction of the new modular STREAMLINE SL-VI series of high pressure pumps for
waterjet cutting, KMT Waterjet Systems offers the ideal technology for every requirement – from
occasional cutting needs to multi-shift operation. Depending on the application the pump is needed
for, customers can choose from different pressure ranges, motorizations and configuration levels.

Different configuration levels to cover
any demand
■

t Pressure Range

KMT offers the STREAMLINE SL-VI pump at three
pressure levels. The PRO intensifier enables
waterjet cutting at 6,200 bar for maximum
performance. The model type PLUS operates at a
pressure level of 4,100 bar, and the type STD allows
for a maximum pressure of 3,800 bar.
■

tMotorization

The STREAMLINE 
SL-VI high pressure pump will
be available with motor ratings from 15 to 200 HP
(11 to 149 kW). The first release of the pump will
include a 30 and 50 HP motor for the PLUS and
STD intensifier as well as a 60 HP motor for the
PRO intensifier – other motor ratings to follow.
■

Unsurpassed productivity
Waterjet cutting at 6,200 
bar has a few major
advantages which are particularly relevant for
efficiency where operators need to cut thick and/
or very hard materials. The high operating pressure
improves conformality as well as the quality of
the cut edge compared to traditional 4,000 
bar
applications.
■

■

tConfiguration

The different configuration possibilities range from
the Stripped model without electrical cabinet,
doors and cover for complete integration into the
centralized control unit of an entire turnkey system
to basic stand-alone machines for occasional
cutting needs to fully equipped pumps which enable
the most demanding cutting applications in an
industrial environment.

■

■

■

t Depending on the material and its thickness,
cutting with 6,200 bar allows operators to
increase the cutting speed by up to 50%. In
some applications, the increase is even higher.
t Higher operating pressures improve
conformality as well as the quality of the cut
edge. In many cases, there is no need for
reworking cut edges.
t Cutting with 6,200 bar significantly reduces the
consumption of abrasive.
t Thanks to the increased cutting speed, more
workpieces can be cut in the same time. This
leads to lower costs per piece.
t The high working pressure when piercing and
cutting the workpiece reduces the delamination
for composite material.

THE HEART OF WATERJET CUTTING

KMT GmbH • KMT Waterjet Systems
Hohe Straße 4-6 ■ 61231 Bad Nauheim ■ Germany
Phone: +49-6032-997-0 ■ Fax: +49-6032-997-270
www.kmt-waterjet.com ■ info@kmt-waterjet.com
KMT Waterjet Systems Inc.
635 West 12th Street ■ Baxter Springs ■ KS 66713
USA
Phone: +1-620-856-2151
KMT Machine Tool Ltd.
No. 251 Ri Ying Nan Road ■ WaiGaoQiao Free Trade Zone
Shanghai, 200131 ■ China
Phone: +86-21-5048-4621
08/2015

STREAMLINE SL-VI

The Right Solution for Every Application