HTSD High Temperature Drum Heater0 pages
Technical Datasheet
Type HTSD Drum Heaters
Applications:
The HTSD range of side drum heaters is based on the HISD
design, but has a higher operating temperature (up to 220°C).
Four standard sizes are available for drums of 25L, 50L, 105L
and most common the 200L. All four sizes of side drum heaters
have their own internal insulation to aid thermal efficiency.
HTSD side drum heaters are specifically designed for the melting
or reducing the viscosity of products that require higher powers
than can be achieved with the HISD Type.
Construction:
l Silicone/Glass Fabric Jacket
l 20 to 220°C Thermostat
l Thermal Insulation
l Adjustable Quick Release Buckles
l Standard Sizes
The heating element of the HTSD range of side drum heaters is
stiched into an insulated jacket made from silicone coated glass
cloth, insulated with a stitched blanket of needled silica glass
complete with quick release buckles for ease of installation and
removal. The heating element is of double insulated construction
for safety.
All HTSD side drum heaters are supplied with 4 metres of
rubber power cable and fitted with a 20 to 220°C thermostat.
Jacket Material: Silicone coated glass fibre cloth
Insulation:
Glass filament blanket
Element:
Silicone insulated spiral wound resistance
element
Control:
20 to 220°C Adjustable thermostat
Power Cable:
4 Metre HO7RN-F
Fixing:
Nylon webbing with quick release
adjustable buckles
25L, 50L, 105L, 200L
l Bespoke Sizes to Order
l 4 Metre Power Cable
l Class II Double Insulation
l IP40 Protection
Holroyd Components Ltd.
Shire Hill Industrial Estate,
Saffron Walden, Essex
CB11 3AQ United Kingdom
Tel: +44 (0) 1799 523177
Fax: +44 (0) 1799 513714
sales@holroydcomponents.com
www.holroydcomponents.com
UL and VDE approved manufacturing facilities
Health and Safety:
All HTSD side drum heaters are manufactured to conform to the
EEC low voltage and EMC directives and CE marked accordingly.
It is advised that power to the heater jacket be disconnected when
the container is either empty or being filled, or upon installation or
removal of the heater itself. It is recommended that the unit be
operated in a dry environment with the container vented to avoid
build up of internal pressure.
www.holroydcomponents.com
"