VIRTUS INFO0 pages

I N FO
CNC-technology at its best

Optimized nesting
Above all wood materials with special static properties

T E C H N I C A L

and high-quality surfaces represent a cost factor one

Using the plate
to the best effect

Virtus
Configuration example:

would like to keep as small as possible by their optimised utilisation. These requirements are met by nesting
in an ideal way. In so-called nesting, plate-shaped
components are arranged such with respect to each

3-axes working unit
Power: t
Speed: t
Tool interface: t

D A T A

10.0 (S1) / 12.0 kW (S6)
1,000 to 24,000 rpm
HSK-F63

other that optimum use is made of the original plate.
industries. The main fields of application in wood machining are for plank plywood and sandwich elements.
In the case of the CNC-machining centre VIRTUS, the
CAM-module NC-Hops performs the administration of
the plates available in accordance with their material,
size, number and the side on which they are resting on
the table.
On the loading side of the VIRTUS there is a lifting table
that permits the stacking of the plates in dimensions
2,800 x 2,070 mm to a height of about 600 m. The lifting table is automatically positioned at the entry level
by means of an integrated sensor. The extendable extraction and push-out device removes the milled plate
and at the same time cleans the machine table. The
finished plate is pushed onto a conveyor belt situated
at the exit side and transported out of the machine.
Simultaneously, a new plate is positioned on the
loading side of the machine table.

Multi-spindle drilling unit with groove saw
Power: t
2.2 kW
Speed: t
3,200 rpm
13 drilling spindles in L-form: 10 vertical drilling spindles + 3 horizontal drilling spindles t
t
1 spindle for saw Ø 120 mm, attached in X-direction
Tool changer
t
Plate changer with 14 places (moving along in the X-axis)
NC-axes
Linear axes: t
X = 3,870 mmt Y = 2,680 mmt
Z = 200 mm
Axes speeds:t
In X- and Y-axis 70 m/min, in Z-axis 35 m/min
Machine table
Design:t
Working areat
t
t
Accessories: t
t
t
t
t
t
Control system
Type: t

Vacuum grooved table, dimensions = 3,250 x 2,180 mm
3,200 mm x 2,150 mm for unilateral loading,
2 x 1,000 x 2,150 mm (as an option) for reciprocal
loading, table partitioned with 2 clamping stations
5 x pneumatically retractable stops with automatic control t
at the rear, 5 x pneumatically retractable stops with t
automatic control at the front, 1 x group of stops at the rear, t
1 x group of stops at the front, vacuum pump 500 m3/h, t
vacuum accumulator 500 litres, 1 license NC HOPS with t
work centre and additional module V5 for nesting
Siemens Sinumerik 840D sl

Virtus,
optimized nesting

Safety equipment
tSafety-bumper
Supplementary equipment on demand.

Reichenbacher Hamuel GmbH
Rosenauer Straße 32 · D-96487 Dörfles-Esbach
Phone: +49 (0)9561-599-0 · Fax: +49 (0)9561-599-199
info@reichenbacher.de · www.reichenbacher.com

04/ 13

This technology is known from the textile and the steel