MS Submersible Mixer0 pages

MS 400, MS 650 Series submersible mixer

The MS series mixer have been
designed for a wide range of
applications. The units can, for
example, be used for many mixing
and stirring applications in sewage
treatment plants and in industrial and
chemical processes.
The submersible mixers can be installed in all tank shapes and sizes.
Depending on the requested intensity of mixing and flow formation, one or
more mixers may be installed in a single tank.
Features:

Name

Description

Motor

IP68, F class insulation, 50 or 60 Hz, three phase
Thermal sensor for each phase

Propeller

Technically optimized, axially operating 3-blade
propellers with very good self-cleaning effect for
vibration-free operation.
The propellers are designed to achieve high thrusts and
therefore a high flow capacity in axial direction
Double highly quality sealing unit using a SiC/SiC,
independent of direction of rotation and resistant to
temperature shock.
All bearings are lubricated-for-life and
maintenance-free, with a calculated life time of more
than 100,000 hr.
Strictly static and dynamic balance check to ensure the
smooth operation

Mechanical seal

Bearing

Shaft

Cable

10 m sewage resistant CSM material. Type: H07RN.

Protection

With DI sensor located in oil chamber, it will detect any
moisture before enter into the motor chamber from the
shaft seal. And give you timely warning about the
problem occurred.