Analytical Products Universal IV CM0 pages

DREXELBROOK

®

A Leader In Level Measurement Solutions

Universal IV ™ CM Model
2-Wire, 4-20 mA, Water Cut Monitor

Applications

Automatic Well Testing (AWT)
Lease Automatic Custody Transfer (LACT)
Basic Sediment and Water (BS & W)
Separation Vessels
Pipeline Slug Detection
Truck Unloading
Pump Protection
Dielectric Analysis
Machinery Lube Oil Monitoring

Durability
Our Perm-A-Seal sensing element does not require
epoxy coatings that wear out and require expensive
servicing. There are no gaskets that require servicing
and the sensing element is robust in well fluids that
include large amounts of sand.

Eliminate Routine Maintenance
Use the Best
For over 50 years, Drexelbrook has established
itself as the world’s leader in capacitive based
water cut measurements. We have done this
by providing reliable and accurate products at a
reasonable cost. We offer the highest pressure and
temperature ratings in the industry. Our probes can
handle pressures up to 1500 PSI and temperatures
up to 450°F.

Easy Configuration - Now with Built-in
LCD Display and Keypad
All Universal IV CM comes from the factory precalibrated and requires only one point validation.
Field configuration can be done from anywhere
along the two-wire loop with our HRTWin PC
Software. You can also configure via local display
/ keypad without the need for laptop or handheld
communicators.

Worldwide Approvals
The Universal IV CM Model has been approved for
Class I, Div1, and Zone 0 hazardous locations. FM,
FMc, ATEX, as well as IECEx approvals are available.

The Universal IV CM (Cut Monitor) is built upon
the Drexelbrook expertise in RF Admittance that
allows the electronics to ignore paraffin and other
coatings that buildup on the probe. No need to
take apart spool pieces and tie-off large pipelines.
The Universal IV CM can be configured for NPT or
flanged mountings and can be installed in common
pipe diameters.

0-50% in Light Oil & 0-80% in Heavy Oil
The Universal IV CM comes factory pre-calibrated
to one of 11 pre-set ranges, for Light Oil (API Gravity
> 25) and Heavy Oil (API Gravity < 25)

Cote Shield™
The proven Cote-Shield is designed into the
Universal IV CM series and enables the instrument
to ignore a pre-determined length of the sensing
element. The ability to ignore a pre-determined
length allows the sensing element to extend into
the fluid beyond the nozzle mounting, and possible
pipe elbows, which can affect the measurement.
The Cote-Shield™ puts the sensing area of the
insertion probe directly into the process stream
and guarantees a more representative sample of
the emulsion.