Vacuum gripper for lifting wooden doors0 pages
TAWIGrip
TAWI.com
TAWIGrip vacuum grippers for sheet/panel up to 500 kg
TAWIGrip
Door Lifter
These doors weigh 80 kg.
Before the investment in a
TAWIGrip vacuum gripper,
the doors were lifted manually.
The TAWIGrip is a 4-foot yoke, max
capacity 80 kg, with two crossbars
on a main yoke.
Vacuum source is pneumatic.
The door is gripped and picked
up from a vertical position and
tilted 90 degrees into a horisontal
position.
It is rotated 90 degrees in the
horisontal plane and then tilted to
be placed in a vertical position in
the rack.
Even though the working area is
small and ceiling height low, it is
possible to install this lifting aid.
The TAWIGrip is suspended in a
Lyftman SPECIAL PROJECT underbraced jib arm UVM, in LR170 steel
profile, max 150 kg.
—
—
—
—
—
—
—
—
—
TAWIGrip vacuum gripper can lift, tilt and rotate sheet metal, glass and laminated panels.
Choose between: TAWIGrip with Pneumatic Vacuum Source or Electric Vacuum Source.
Horisontal: Up to 500 kg or more on request. Vertical: Up to 250 kg.
Choose between: Horisontal-Horisontal, Horisontal-Vertical, Vertical-Vertical
Safe, two-handed release function
Visual control of the vacuum level
Easy-to-use control board
Twin chamber vacuum system
Light weight design
©Copyright TAWI AB Sweden 2011 All rights reserved
TAWI AB Box 10205 434 23 KUNGSBACKA SWEDEN • Tel +46 (0)300 18500 • info@tawi.se • www.TAWI.com
"