Pump Logix P-Series0 pages

PRESSURE PRIME™
Non-Clog
Non-Clog Pumps

Pump LogixTM P-Series – a New Generation in Pump Control

The PumpLogix™ P-Series controller is an intuitive
pump controller; it is versatile and can be used as an
intelligent Remote Terminal Unit (RTU) and a
competent member of your SCADA (Supervisory
Control and Data Acquisition) system. MODBUS®
protocol is standard.
PumpLogix™ P-Series I/O Retrofit Features

The controller has an optional on-board audible
alarm and an external alarm driver that activate on
High and Low Level Alarm or Transducer Failure
Alarm (i.e., input out of range).
The PumpLogix ™ P-Series interface allows the
operator to easily set the alternation order to
Sequential, 1st On/1st Off, or Lead Pump Selectable.
Manual level simulation allows the operator to test
the controller’s operation and conf irm the
configuration. Also the controller always indicates
actual wet well level while in simulation mode.

• Two External Inputs: Alarm Acknowledge
and Control Inhibit

For an interactive PX-2 demonstration, visit:
www.smithandloveless.com/pumplogix

• Three Isolated, Individually Fused Solid-State
Triac Outputs Capable of Switching 1.5 Amps
@ 120 VAC (Pump Required and
Common Alarm)

The PumpLogix™ P-Series controller is ideal for
sewage lift stations or water systems applications.

• Two DC/FET Outputs: System Monitor
and External Audible Alarm

Available in 2-pump and 3-pump configurations.

Online: smithandloveless.com • Phone:

Available in 10’, 20’ and 40’ operating range.

Bulletin No. 680 ©2006, 2008 Smith & Loveless Inc.

A Feature-Packed System
Whether dealing with a new installation or
retrof itting an existing panel, the PumpLogix ™
controller provides outstanding control, alarm and
telemetry.

9 1 3 . 8 8 8 . 5 2 0 1 • FA X : 9 1 3 . 8 8 8 . 2 1 7 3

Smith & Loveless Inc. System Innovators for global p umping, water and wastewater treatment