ED Series Catalog0 pages
ED/Eco Series
Right Angle Index
Description
Sankyo's ED/Ecological Series features a nickel plated steel housing machine from a billet to add extra strength.
All sides are machined smooth, to tolerance with mounting holes on all sides. The output features a flange for
mounting dial plates, hub less sprockets or weldment fixtures with the shaft acting as the center pilot. The shaft
portion can be cut to length or used with a torque limiting clutch to mount a dial plate or couple to a shaft. A
globoidal cam rotates Sankyo made needle bearing type cam followers. Optimizing the cam follower diameter
inherently maximizes torque transfer and extends the life hours due to fewer rotations with increased surface
contact. Multiple index periods offer continuous or on demand duty cycles with the indexing flange locking in
position within 30 arc seconds during the dwell period. The output flange turret is mounted with top and bottom
tapered bearings which supports large bending moments, maintain rigidity and reliability. These versatile units
index in both directions or oscillate by reversing the motor. Most units are driven with geared motors that are
within the height of the index unit housing. There’s no need for spacers or burning a hole in the mounting plate to
accommodate for drive height interference. An optional TF series torque limiter safety clutch mounts between the
index and indexing dial plate or a TC series acts a coupler for shaft to shaft applications.
Torque thresholds are easily adjusted without any disassembly and a proximity sensor
detects overloads. Timing cam packages are available with inexpensive photo beam
sensors or proximity switches for wash down (IP67/NEMA-6/6P)
applications. All units can be ordered with wash down motors, corrosion
resistant shafts and torque limiters for packaging or wet environments.
Class-10,000 cleanroom models have sealed polished stainless covers
mounted over any voids to eliminate trapping particles which is perfect
for medical or semiconductor applications.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Corrosion resistant and class-10,000 cleanroom models including environment compatible torque limiting clutches
2 to 48 incremental output stops in 1 to 4 cams (4 dwell cams index 4 times with 1 input shaft revolution)
Dial diameters range from 304mm to 914mm (1 to 3 feet)
90° to 330° index periods with Sankyo modified sine or constant velocity (~50% CV) cam curves
Maximum 300 cycles per minute, bi-directional indexing, oscillating motions
±30 arcsec indexing accuracy (average ±12 arcsec), 30 arcsec repetitive, ±60 arcsec for 2-dwell cams
Nickel plated billet housings are available in 6 standard sizes ranging from 38 to 110mm input to output shaft centers
Standard output incorporates a flange or shaft, available with optional torque limiting clutch
Index mounts in any position with right angle gearmotor mounting in 90° increments on either side of the index
Standard brushless dual voltage (230/460) gearmotors are UL & CE certified, brake motor or wash down optional
Variable frequency drive controller utilizes electronic braking and variable speed for gearmotors in 115-1ph, 230-1/3ph,
460-3ph volts, 50/60 Hz, UL & CE certified
Stop/start frequency up to 60~90 per minute (output load/reducer dependant), clutch brake or servo drives are available
Standard IP50 photo eye timing sensor pkg. supplies dial “in position” signal to stop motor, IP67 proximity type optional
Output torque limiting clutch option features quick-adjust torque setting, automatic reset every 360° & overload detect prox.
TF series clutch mounts to the index output shaft with flange mounting for a dial plate or sprocket
TC series clutch is used as a coupler to connect the index output shaft to a drive shaft
Options
TF series flange
mounting for dial
plates
TC series is used
for coupling two
shafts together
Standard timing cams are plastic with IP50 photo
eye sensors multiple sensor can interlock support
machine crashes (IP67 proximity sensors optional)
Hollow bore right angle gearmotors can
be mounted in 90° increments
10655 State Route 47 • P. O. Box-4338 • Sidney, Ohio 45365-4338
Tel: (937) 498-4901 • Fax: (937) 498-9403
www.sankyoamerica.com • sales@sankyoamerica.com