LD1X-S0410 pages

DeltaSpan
DeltaSpan LD10 0603 DS2_1
TM
Two-Wire Pressure Transmitter
Features
Rugged stainless steel transducer
with flexible polyurethane cable
Optional weight anchors sensor in
turbulent or fast moving liquids
Removable guard protects sensor
from damage and process debris
Specifications
Range:
LD10: 0 to 7.5 psi
(0 to 0.5 bar)
L D 1 1 : 0 to 15 psi
(0 to 1 bar)
LD12: 0 to 30 psi
(0 to 2 bar)
± 0.25% of span
Accuracy:
Supply voltage: 7-35 VDC
(Vs-7) x 50 ohms
Loop resist.:
4-20 mA, two-wire
Signal output:
None, fixed span
Calibration:
F: -5˚ to 125˚
Process temp.:
C: -20˚ to 50˚
Temp. comp.:
Automatic
Proof pressure: 2 x full span
Burst pressure: > 35 x full span
Enclosure rating: NEMA 6X (IP68)
Probe material: 316 ss and 17-4 PH ss
Cable material: Polyurethane
Cable type:
2-conductor, shielded
Cable length:
LD10: 0 to 32'
(0 to 9.8m)
L D 1 1 : 0 to 32'
(0 to 9.8m)
LD12: 0 to 48'
(0 to 14.6m)
Weight:
Approx. 100 grams
Classification:
General purpose
CE compliance: EN 50082-2 immunity
EN 55011 emission
DeltaSpan
IP
68
Description
The general purpose two-wire pressure transmitter provides contact
level measurement up to 30 psi or 2.0 bar and is ideally suited for relatively clean water, light oil or diluted corrosive liquids. The transmitter
is typically selected for underground bulk storage, wet well, open channel or pond applications. Media examples include irrigation water and
motor oil. For integral wiring termination and process mount, order the
LD90 installation kit for use with your transmitter. Each kit includes a
compact junction box, PP plug fitting and nylon cable connector for fast
installation. Its level made simple!
Ordering
LD1
Sensor range (1) (2) (3)
0
0 to 7.5 psi (0 to 0.5 bar)
1
0 to 15 psi (0 to 1 bar)
2
0 to 30 psi (0 to 2 bar)
-S041
Ordering Notes
1) The maximum sensor range in tank height
for each type is as follows:
LD10: 0 to 17' (0 to 5.1m)
LD11: 0 to 35' (0 to 10.6m)
LD12: 0 to 48' (0 to 14.6m)
2) For integral conduit termination and process
mount (PP), order the LD90-1001 (2" NPT) or
LD90-1061 (1 1/2" G) installation kit for $120.
3) For additional loading of the DeltaSpan, order
the nose cone weight (LD10-NOSE) for $90.
10500 Humbolt Street • Los Alamitos, CA 90720 • www.flowline.com • T (562) 598-3015 • F (562) 431-8507