Vari-lift Gas Spring0 pages

"

Camloc

nnnn

Motion Control

nnnn

Vari-Lift

nnnn

TM

nnnn

In-situ force adjustment

nnnn

When Gas Springs are used, it is often

nnnn

found that theoretical forces will be

nnnn

incorrect because factors such as hinge

nnnn

friction and perceived speed of action will

nnnn

have a bearing on calculations.

nnnn

Camloc Motion Control Ltd has designed an adjustable force gas spring called

nnnn

'Vari-Lift™'. Not only can it be adjusted to meet Individual preferences but It can

nnnn

also be adjusted whilst In position, saving you both time and effort.

nnnn

The gas springs are charged to their maximum force during manufacture. By using

nnnn

the standard tool provided, gas can be gradually released via the Vari-Lift™ valve at

nnnn

the end of the tube to provide the force suited to your application. Once this has

nnnn

been established, Camloc Motion Control Ltd Is then able to measure this force and

nnnn

provide production fixed force gas springs to your precise requirement.

nnnn

Vari-Lift™ gas springs can also be used if panel weights vary. These will allow you to

nnnn

provide the perfect solution to your customer's needs every time. Spring force

nnnn

ranges from 50 Newton (5kg or 11 lbs) to 2500 Newton (250kg or 550lbs) with

nnnn

standard strokes from 40mm (1.57") to 500mm (19.69").

nnnn

Vari-Lift™ gas springs are also available In stainless steel, either manufactured to

nnnn

order or from stock via Camloc Motion Control Ltd's network of distributors.

nnnn

Benefits

nnnn

• No need to calculate force

nnnn

• Adjustable to any force within range

nnnn

• Force can be adjusted after installation

nnnn

• Simple adjustment using standard tool supplied

nnnn

• Ideal for prototyping and short production runs

nnnn

• Available as an option on most types of Camloc gas springs

nnnn

• Ideal where application weights vary

nnnn

• Available in stainless steel

nnnn

• BS EN ISO 9001 Registered Company

"