Diaphragm Water Pump0 pages
DCP30 03-2006
SPECIFICATIONS
Stanley Hydraulic Tools
3810 S.E. Naef Road
Milwaukie, Oregon 97267
Tel 503•659•5660
Visit our website at www.stanley-hydraulic-tools.com Fax 503•652•1780
Hydraulic Tools
12VDC Water Pump
DCP30
ITEM U.S.A. METRIC
Voltage Requirement 12 vdc
Current 9.5 amps
Maximum Water Flow 3.3 gpm 12.5 lpm
Maximum Water Pressure 40 psi 2.8 bar
Cut-Out Pressure 45 psi 3.1 bar
Cut-In Pressure 30 psi 2.1 bar
Weight 12.6 lbs 5.7 kg
Length 12.5 in 318 mm
Width 11 in 279 mm
Height 15 in 381 mm
Use with Diamond Chain Saws
The DCP30 water pump is intended to
be used to supply water to the chain
and bar on Stanley Diamond Concrete
Chain Saws and other diamond chain
saw brands as well.
Features and Benefi ts
The 12 vdc Water Pump is a threechamber
positive displacement diaphragm
pump. This pump will deliver
water fl ow to a pressure of 45 psi.
Maximum output fl ow is 3.3 gpm. At
40 psi, this pump will deliver about
2.2 gpm.
The Water Pump has a built-in
pressure switch which will automatically
shut off the pump when
pressure reaches 45 psi. The switch
will turn on the pump when pressure
drops to 30 psi. The settings of the
pressure switch are preset and cannot
be adjusted.
The Water Pump is self-priming.
It will draw water up to a maximum
lift of 8 feet.
The diaphragm construction allows
the pump to run dry without
damage. There are no rotating seals
to wear or leak.
The built-in thermal protection
will automatically shut off the pump
before it is damaged by overheating.
The shut off will automatically reset
after the pump cools.
The pump has a fi nned heat sink
for cooling. This makes the pump a
continuous-duty pump.
The built-in check valve maintains
water pressure after the pump shuts
off. It also prevents water from fl owing
back into the water supply. If
your water supply is from a potable
water source, water in the pump
outlet will not fl ow back into the water
system.
A strainer is provided in the suction
line to prevent debris from entering
the pump. The strainer is easily
disassembled for cleaning. The clear
cover allows you to see the condition
of the strainer.
The current draw will be between
3.6 and 15 amps, depending on outlet
pressure.
Model DCP30101 Water Pump