Pressure Sensor - Model 86 5psi0 pages

Model 86 5 psi
86 5 psi www.meas-spec.com 1008
1/4
• 316L SS Pressure Sensor
• Small Profile
• 0 - 100mV Output
• Absolute and Gage Low Pressure
• Temperature Compensated
DESCRIPTION
The Model 86 is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a
316L stainless steel housing. The Model 86 is designed for o-ring mounting and OEM applications where
compatibility with corrosive media is required.
The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to
the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for
temperature compensation and offset correction. An additional laser trimmed resistor is included which can be
used to adjust an external differential amplifier and provide span interchangeability to within ±1%.
Please refer to the Model 86 UltraStable™ datasheet for information on products with operating
pressures greater than 5psi.
FEATURES APPLICATIONS
• O-Ring Mount • Medical Instruments
• -20ºC to +70ºC Operating
Temperature Range
• Process Control
• Fresh & Waste Water Measurements
• ±0.2% Pressure Non Linearity • Partial Vacuum Gas Measurement
• 1.0% Interchangeable Span
(provided by gain set resistor)
• Pressure Transmitters
• Tank Level Systems (RV & Industrial)
• Solid State Reliability
STANDARD RANGES
Range psig psia
0 to 5 • •