Gas cooler series EC0 pages

M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
info@mc-techgroup.com
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
3-4.1 10.96/09.09
Application
EC gas coolers are used in gas analysis to
lower the dew point of humid to avoid
condensation in the analyser. An extremely
stable gas dew point avoids water vapour
crosssensitivity and volumetric errors.
Gas Cooler Series EC®
Version EC, ECS and EC-Ex
for 4x 250 Nl/h
Special Features
Jet Stream heat exchangers in 3 standard
materials
Ambient temperature up to 50°C
Outlet dew point adjustable from
+2 °C to +7 °C
Dew point stability ± 0,25°C
Status alarm contact standard
Optimum reliability
Self-controlled
TA-Luft approved
Explosion proof version according to
ATEX and NEPSI for zone 1
100% CFC-free
Description
The electronically controlled compressor
cooling system and the special design of the
jet stream heat exchanger guarantees optimum
dew point reduction to a low, stabel
value and secures condensate formation. No
external pre-draining is needed.
Up to 4 peristaltic pumps can be installed in
the EC to drain condensate. Otherwise the
condensate must be removed with traps or
collected in vessels.
A fan unit EC-F for ambient temperatures
>40°C or a peristaltic pump unit EC-D is available
to fit the base of EC/ECS for condensate
drainage.The peristaltic pump unit is also
available as version EC-FD with additional
fans to force the airventilation.
The new design enables up to 4 heat
exchangers to be incorporated either at the
factory or later, without any problem. They
can be connected in series or parallel.
Heat exchangers are available in various
materials depending on the application. LED
indicate the operating conditions. A temperature
deviation of ±3 °C triggers an alarm.
The gas coolers are self controlling
and
maintenance-free in operation.
EC-1G/EC-F, EC-4G/EC-FD