Roller telescopic slides TLR.., TLRX..0 pages

Roller telescopic slides TLR.., TLRX..
T ele s c o p i c s li d e s R A N G E
The TLR slides are the world’s only telescopic slides system which incorporated self-aligning feature to absorb parallelism errors of the mounting surfaces,
when used in pairs.
The TLR slides are designed for heavy duty High-Tech telescopic applications,
with precise motorized movement, requiring constant smooth sliding performance with no play. Recommended for high frequency applications.
The high performance is provide by use of double-row precision bearings, strong rails
with hardened and honed raceways, fixed to a rigid intermediate S-shaped steel plate, assuring high load capacities and low flexion at even fully extended position.
The TLR slides guarantee maintenance free operation, thanks to strong raceway wipers
and longitudinal seals for dust and impurity protection. An integrated lubed for-life greasing system, assuring a constant thin layer of lubrication on the raceway surfaces, for a long
operation period.
TLR system offers unique possibilities and benefits for all kind of automation applications
with variable strokes, for which a ball-cage slide often has ball-cage creeping problems, i.e.
friction problems to reach full extension, as ball-cage is forced out to end position, instead
of rolling.

TLRX slides for corrosive ambients
For corrosive ambients is available TLRX, with all components and intermediate element in stainless steel INOX, except the rails, which have T
RACE-NOX anti-corrosion treatment; a oxidation treatment and impregnation in hot oil, to offer a good corrosion resistance.

Extension

The TLR slides allow for an extension equal to the closed slide plus a small constant.
The extension is obtained by movement of the intermediate element and the lower rail, while
the upper rail is fixed to structure.
As it can be seen on left figure, the movement of the lower rail is more than the upper rail, due
to optimizing of load capacity and the fact that the rollers are positioned on the intermediate
element to offer max load capacity in this position. Hereby the TLR slides are asymmetric,
so the slides must be ordered as left side slide TLRS and right side slide TLRD and when installed the product code must be on top side.
The load capacities are all indicated per single rail, with centered load position, equal to half
the rail in extended position.

Self-aligning capacity

Compensation

When TLR slides are used in pairs, they offer the possibility to absorb minor structural errors or non-precise installation, which otherwise would much increase the required force for
moving the mobile part, in both extending and closing direction. A typical problem for ballcage telescopic slides.
Using a pair of self-aligning TLR slides, smooth low friction movement is assured, along with
a more easy installation and/or less precise workings of structure, i.e. cost savings. The selfaligning feature is obtained by having a combination of floating rollers and guiding rollers in
the TLR..A. i.e. allowing for a minor rotation of the rails, maintaining the preload in both upper
and lower rails of the TLR..A slide.
The suffix A in TLR..A, indicates “Aligning” The concept is well illustrated in the catalogue section MONORACE , for which the base components have their origin.
To be noted that the rotation of the TLR..A slide hereby changes the nominal value of 18,6mm
to 17,2mmm ( S min) – 19,0mm ( S max) while compensating dimensional errors on mobile
structure or distance errors between the two lateral sides of fixed structure, for which the
upper rails are fixed to. Herewith avoiding binding-problems, with would much increase friction force, with consequent reduced load capacity and expected life-time.
The TLR..A is in general always used in pair with a standard TLR, to assure good lateral stability. However good self-aligning can also be obtained for movement of vertical panels, with
use of TLR..A at top to absorb some mis-alignment, and with some retainer guidance at lower part. Please refer to page 70, for further information.

46