MULTISTREAM® B - Solid Flow Meter low-cost and flexible0 pages

MULTISTREAM® B Solids Flow Meter

Flow rate measurement according to
the impact plate principle
Compact design - no loss of headroom
due to additional chutes
Cost effective, simple integration offset-free arrangement of inlet and
outlet
Dust-tight stainless steel housing
Weighing electronics can be
integrated in the mechanical system

Application

Construction

Functions

MULTISTREAM B Solids Flow Meters are designed as enclosed in-line
measuring systems for continuous
acquisition of flow rates and totalized
amounts. With flow rates up to
100 t/h, or max. 80 m³/h, these
measuring systems can be used for
flow rate and consumption
measurement
totalization and
batching
of pulverized to granular materials
with a grain size of up to 30 mm.
Equipped with a controllable prefeeder, MULTISTREAM B is also
available for use as a feed system,
upon request.

The standard equipment of
MULTISTREAM B Solids Flow Meters comprises:
Stainless steel housing
Impact plate
Load cell
Integrated electronic box
Designed as a complete module for
local operation, the ECOCONT
weighing electronics can be easily
accommodated in the box which is
integrated in the measuring system.
Of course, it is also possible to install
the weighing electronics outside of
the measuring system, e.g. in the
control cabinet.

Measuring systems operating according to the impact plate principle acquire the flow rate by means of a
reactive force.

Its inlet/outlet arrangement without
offset makes this measuring system
specially suitable for economical
integration into existing production
plants.
BV-D2034GB

Guided by the inlet pipe, the material
stream hits the impact plate mounted
at a defined angle of inclination. The
load cell and the weighing electronics
acquire the horizontal component of
the reactive force. Material build-ups
do not affect the measuring result.
Reproducible conditions of material
feed, e.g. height and speed of fall or
angle of impact, provide for highest
accuracies.
If higher accuracies are required,
check measurements are necessary
which allow the measuring system to
be calibrated without interrupting
material flow. Requiring a presilo to
be weighed, this additional equipment is available upon request.