MAGNETIC ROLLER (R-RM)0 pages
IRON METALS SORTING by MAGNETIC ROLLERS (R-RM)
INTRODUCTION
Both iron and non-iron metals make up one of the groups of materials to have a greater presence in
waste reduction, since they involve a great worth. Iron metals are the highest percentage elements
and are the most easily captured by magnetic fields. Aware of this serious environmental problem,
REGULATOR-CETRISA has developed a complete line of sorting equipment: the Permanent Magnetic
Roller (R-RM) and the Electromagnetic Roller (R-RME), in order to be able to separate, recycle and
recover iron metals.
PHYSICAL PRINCIPLE and CHARACTERISTICS
The Permanent Magnetic Roller (R-RM) has a cylindrical body containing powerful magnets, ferrit or
rare hearth (Ne-Fe-B), making it a high intensity magnetic separator. There is no energetic cost.
Magnetic Roller (R-RM) are used installed instead of conveyor head Roller or after a vibrating
feeder. It is able to carry the conveyor on. REGULATOR – CETRISA is able to manufacture any Roller
in order to replace the existing Roller, so customer has no any dimensional change.
Sometimes, when a very high power or very big diameter is needed, REGULATOR – CETRISA is able
to make and supply an Electromagnetic Roller (R-RME). It needs an electrical power supply for
generate the magnetic field.
The magnetic separator operates with the material being fed onto a conveyor or directly through a
vibrating feeder. Non-magnetic material is discharged forward of the Roller in the normal trajectory,
but the magnetic elements are held to the belt and are discharged down the bottom side of the
conveyor, outside of the magnetic Roller influence.
Estándar dimensions.
Contact with REGULATOR-CETRISA to get more information.
Basic dimensions
Length From 200 up to 2.000 mm
Diameter From 200 up to 600 mm
Turn speed Same than conveyor