BS13 / BS14 Valve Lockout System0 pages
© Reece Safety Products Ltd 2006
The Universal Lockout is a modular
construction where the user can add
various accessories to make the device
suitable for a range of valves.
Simply disassemble the device (as shown
in picture) and slot in the relevant
accessory.
A 2.44 Metre cable attachment
(3.25mm dia) can be added to make
device suitable for locking off gate valves.
Optional blocking
arm(s) can be added to
make device suitable
for locking ball valves in
the open, closed or set
positions.
Model BS13 (small) will fit
maximum handle/lever thickness
of 13mm. Model BS14 (large)
will fit maximum handle/lever
thickness of 28mm
Which do I need ?
Reece Safety Products Ltd
Premier House, Manchester Road,
Mossley, Lancashire OL5 9AA
Tel: 01457 831133 Fax: 01457 831144
Data sheet No: 19 Universal valve lockout BS13 / BS14
Installation Procedure
1) The base unit provides a locking mechanism for locking the device to many plant
structures such as valve hand wheels and levers. Compress the device to open the
clamping jaws to fit. Use as a stand alone unit to lock butterfly valves
2) Add an extension arm to the clamping unit to lock 1/4 turn ball valves.
3) Add the cable attachment to the base unit to lock ball valves / gate valves,
(upto two extension arms can also be used).
4) Once the device is fitted, tighten the handwheel to secure the device in place.
5) Use a padlock to lock the hand wheel to the locking point as shown
to secure in place. Test the device is secure and the valve cannot be operated