Water Desalination Unit0 pages
Working principle The vessel with evaporator and con-denser is evacuated to -0,93 bar by the seawater-driven ejector. At this pressure, the seawater to be distilled enters the evaporator where it evapo-
rates at approx. 44C - 49аC when passing the plates heated by the heating medium - typically hot water (engine jacket water) at 75C - 90аC. The steam leaves the evaporator through the open side of the plate pack and passes through a demister, where any carry-over drops are sepa-
rated for re-circulation, and then enters the condenser positioned above. The clean vacuum steam is condensed into freshwater by circulating cold water on the other side.
ՕՕ >
- for fresh water generation
Additional equipment required Standard equipment Application Benefits The freshwater is pumped to the fresh-water tank, passing a sensor connect-
ed to the salinometer. If the salinity is higher than the pre-set reference value the solenoid valve is activated and the flow is directed back for re-production. Seawater pump The APV H-CE Water Desalination Unit includes Titanium plate heat exchangers for evaporator and con-
denser, vessel, seawater ejector, fresh-
water pump, freshwater meter, frame, control panel with motor starters and salinometer, and dosing unit for anti-
scaling. The APV Water Desalination Unit type H-CE is a fresh water generator for desalination of seawater for production of potable and fresh utility water; used for installation on board ships and rigs. The water desalination unit is a single stage, plate type evaporator and con-
denser, separated by stainless steel demister. The H-CE unit is available in four sizes with capacities ranging from 20m High fresh water quality: Automatic feed-water dosing valve secures optimised freshwater production and low salinity
Low operation costs: Reduced heat consumption due to pre-heating of feed-water and full access for clean-
ing and inspection reduce operation and maintenance costs
Reduced service intervals: Use of corrosive resistant Titanium plates. Pre-installed adjustable chemical dosing unit reduces fouling
Reduced installation costs. Fully equipped control box for easy instal- lation and operation and complete piping. Compact and space saving design will fit into most engine rooms Optional equipment Ejector for alternative heating by steam
UV sterilizing equipment
Re-hardening filter for pH adjust-
mentՕՕ >
3 /24h to 33m >
3 /24h. Products features Heat exchangers with specially designed Titanium plates for effec-
tive steam passage and high effi-
ciency
Condenser cooling combined with ejector water and feed water system and complete piping
Compact and space saving design Օ >