2124 Loader0 pages

نسخه متنی

2124 SPECIFICATIONS

2124 LIFT CAPACITY

HYDRAULIC SYSTEM

Split flow tandem circuit hydraulic system. System pressure 3200 psi. (2,249,822.7 kg)

Lift Capacity Chart PRENTICE 2124 ■ Boom Type: Knuckleboom ■ Boom length: 22' (6.7m)

Type

Operation

Fully independent simultaneous operation of main boom and swing. Flow diverted to operate stabilizers._

Stack sections with mechanical joysticks. Valves contain port reliefs and anti-cavitation valves for loader protection and control. Port relief

settings are 2,671,664.4 kg (3800 psi.)

Control Valves

1.5m (5'H

3m (10')

4.6m (15'H

6.1m (2Q'II

Full Reach

kg.	lbs.	kg.	lbs.	kg.	lbs.	kg.	lbs.
9 1m (30'/)	2962	35'
5528	5528
7 6m (25'/)	2092	4613	2500	30'
2405	5302
2358	5198	1508	3324	2298	25'
2430	5358
3103	6842	2735	6030	1846	4070	2314
4.6m (15'I)	3459	7626	2610	5755	2062	4545
1802	3974	4230	9325	2886	6363	2082	4591	2242	15'
4037	8900	2747	6056	2058	4538
2222	4898	4109	9058	2710	5974	1625	3582	2327	10'
3904	8608	2569	5664	1972	4349
2968	6544	1854	4087	3329
2800	6172	1741	3838	1528	3369

Cylinders	114.3 cm (4.5") Main and stick double acting with solid rods.
Diagnostic Nipples	Located at control valves.
Oil Filter	Two return spin on filters, 2 nominal/10 absolute micron filter. Twenty five micron case drain filter.
Oil Reservoir	159 liters (Forty two [42] gallon) capacity. Filtered breather, sight gauge. Cylindrical design, aluminum fabrication.
Pump Mounting	Direct mounted PTO driven, bi-rotational, delivering 151liters (40 GPM). (Optional Chassis mount configuration)
Loader Pump	Tandem gear type (21 + 19) operating at 1650 rpm (max) through PTO. Pump rated for 2,460,7435 kg (3500 psi)
Swivel	Steel barrel with Durabar core. Five passages for pressure, return and stabilizers. Eight ring electric collector standard for optional light packages.
Hoses & Hydraulic Tubes	2,812,278.3 kg (4000 psi) rated hose with wear resistant coating. Steel ORS tubing.
Fittings	ORS fittings.
KNUCKLE BOOM
Boom Length	67 m (22) horizontal reach. 103 m (34) working height to boom tip. (Optional Tele-Boom): 10.3 m (25) horizontal reach. 11.2 m (37) working height to boom tip.
Boom Structure	Boom is high tensile steel fabrication. Main boom equivalent to 25.4 cm (10") x 15.2 cm (6") Spar tube. Stick boom equivalent to 203 cm (8") x 15.2 cm (6") spar tube.
Construction	Welded high tensile steel "Knuckle type" boom with heat treated high alloy steel pins and aluminum-bronze pivot bushings; self-aligning bushings at both ends of main and stick boom cylinders. Boom & cylinder pin bushings are greased through pins. Castings at base end, stick end and midpoint of mainboom assembly
STABILIZERS
Type	Telescopic A-frame stabilizers with individual platform controls for uneven terrain.
Structural	Stabilizer legs are 17.8 cm (7") x 17.8 cm (7") high tensile steel tubing.
Stab Pads	Stabilizer pads measure 25.4 cm (10") x 38.1 cm (15").
Clearances	Ground clearance for stabilizers in retracted position is 50.8 cm (20"). Below grade reach in extended position is 40.6 cm (16").
Stowed	Stabilizers stowed position 251.4 cm (99") wide. Width at grade level 284.4 cm (112") on 101.6 cm (40") truck Width fully extended 284.4 cm (122").
STRUCTURAL
Pedestal	"A-Frame" pedestal design is formed high strength steel plate.
Swing System	Continuous rotation; ring and pinion gear set driven by an axial piston hydraulic motor through a planetary gearbox. Slewing ring is 65.1 cm (25.65") diameter. Swing torque 71,014.91 kg (14,545 ftJbsl
Travel	Swing system is secured by house lock during transit.
Travel Height	335 cm (13' 2") maximum stowed height above ground 101.6 cm 140") truck frame height
Weight	2,585.4 kg (5,700 lbs) for the 67 m (22) fixed boom model and 2744.23 kg (6,050 lbs) for the 7.62 m (25) tele boom model.
Mounting	"A-frame" mounting base is 90.8 cm (35 3/4") wide x 66 cm (26") long for mounting on standard truck chassis.
CYLINDERS
Main Boom	(1) 11.4 cm (45") Bore x 63 cm (2 1/2") Rod
Stick Boom	(1) 11.4 cm (4.5") Bore x 63 cm (2 1/2") Rod
Stabilizers	(2) 7.6 cm (3") Bore x 5 cm (2") Rod
OPERATION OF LOADER
Operator's Platform	Platform right side mounted with fold over seat. Access to platform by single ladder.
Seat	Fold down seat with armrests
Controls	Two mechanical joysticks and proportional teleboom controls. Swing pedal with mechanical linkage. Individual controls for activation of stabilizer.
WEIGHT	5700 lbs. with 22' boom Add 250 lbs for 25' teleboom option
CAPACITY (Note: SAE Standard 87% Ratings)
Radius	Elevation Lift Capacity
1.5 m (5')	1.5 m (5') 2,290.6 kg (5,050 lbs.)
3 m (10')	1.5 m (5') 3,865.9 kg (8,523 lbs)
4.5 m (15')	1.5 m (5') 2525.1 kg ( 5,567 lbs.)
6 m (20')	1.5 m (5') 1,481.4 kg (3,266 lbs)
6.7 m (22')	1.5 m (5') 9452 kg (2,084 lbs)

2124 Knuckleboom Loaders

Lift Capacity Chart PRENTICE 2414 ■ Boom Type: Knuckleboom ■ Boom length: 25' (7.62m)

1.5m (5'I)	3m (10'I)	4.6m (15'II		6.1m (20'II		Full Reach
kg. lbs.	kg. lbs.	kg.	lbs.	kg.	lbs.	35'
1803	3975	1995
9.1m(30'I) 9.1m (30'I)	2072	4569	30'
1776	3915	1478	3259	1693
7.6m (25'I)	2041	4500	1699	3745	25'
1859	4099	1661	3663	1634
6.1m (20'I)	2107	4645	1910	4211	20'
2178	4802	1891	4169	1769
4.6m (15'I)	2345	5169	1974	4352
5789 12762	3611 7960	2748	6059	2134	4706	1693	10'
3m (10'I)	6680 14727	3662 8074	2614	5764	2021	4456
2303 5077	4233 9332	2831	6243	2068	4460	1642	5'
1.5m (5'I)	2647 5835	4021 8864	2683	5915	1908	4207
2958 6522	3715 8191	2445	5390	1459	3216	2592	0'
0 0.0	3400 7496	3509 7736	2303	5077	1361	3001	-5'

NOTES:

Capacities shown in "Black" are 100% of main cylinder hydraulic capability; capacities shown in "Red" are 87% of hydraulic capacity.

Notice that some of the lifts in "Red" are higher than main only, since the stick has mechanical advantage and the limiting lift is the

main relief.

Note: Deduct grapple weight for payload

[prentice]

www.prenticeforestry.com

Built Better Than It Needs To Be

Caterpillar Forest Products

535 Mack Todd Road Zebulon, NC 27597 919-269-7421

We reserve the right to change specifications and to improve our products without notice or obligation. Photos may not represent standard machine configuration.

Form No. PRSL-0408 ■ Printed in U.SA

اطلاعات تماس

2124 Loader0 pages

تمام کاتالوگها و بروشورهای فنی شرکت Prentice

IRAN INDUSTRY EXPO

خدمات بازرگانی