عضویت 
ورود اعضا
راهنمای خرید
DC test kit0 pages
FT3000
POWER FILTER
CHARACTERISTIC TESTER
FT3000 Power Filter Characteristic Tester
has the functions of automatic sweep
harmonic signal output, A-F and P-F
characteristic measurement/display ect. It
is mainly used in AC filter of DC convertor
station , DC filter tuning characteristics test
and parameter test of R, L and C. It is also
used in electrified railway HV filter, passive
power filter client and conventional AC
substation reactive compensation device.
Quickly and accurately Test the following parameters
Amplitude-frequency characteristic and phase-frequency characteristics
nductance value of reactor
Capacitance value of capacitor
Resistance value of resistor
Unbalanced current of filter bank H bridge
www.relaytest.com
f |
Main Functions
Automatically display the A-F characteristic curve
Automatically generate the test report in word format
Automatically generate the test report in word format
Field test accuracy can reach 0.5%
Measure capacitance without unfasten the capacitor banks
Ma feting y our wor\z easy is> our wor\z\
Specifications
Signal source technical parameters
Max output voltage
60V RMS
Max output current 5A
Output frequency 5Hz—3000Hz
Frequency control step 0.1 Hz
Measurement system technical parameters
Voltage
Accuracy
Frequency
0.5%
5Hz—3000Hz
Amplitude
Current
Accuracy
0.2V—60V
0.5%
Frequency
Amplitude
5Hz—3000Hz
0.01 A—10 A
Impedance measurement range
Impedance measurement accuracy
Phase measurement accuracy
1Q— 6KQ
0.5%
r
Inductance measurement range
Inductance measurement accuracy
Capacitance measurement accuracy
2mH—10H
0.5%
0.5%
Capacitance measurement range
0.05uF-500uF
Unbalance current measurement accuracy
Frequency output_
0.5%
100Hz—3000Hz
Amplitude output
0.01 mA—1 0 mA
Others
Operation
Off-line operation/External PC operation
communication
USB/100M Ethernet
Self Protection
Overload/Overheat
Report
LCD
Dimension
Weight
1 000 Reports
8.4" TFT
364 mm x 200 mm x 475mm (WxHxD)
1 1.8kg
"
