TWIN ROD SLIDE UNIT SERIES 62000 pages

"

>p/ Series 6200 Twin rod slide units

nnnn

General

nnnn

TWIN ROD SLIDE UNITS SERIES 6200 AND 6210

nnnn

The 6200 series twin-rod linear guide units are wide cylinders used in manipulation applications and

nnnn

are characterised by their high force output thanks to their double piston design.

nnnn

Bores range from 10mm to 32mm diameter, with sintered bronze bearings for standard applications

nnnn

and linear ball bearings for more rugged applications.

nnnn

One major characteristic of these cylinders is the precision of their anti-rotational design, with the

nnnn

possibility of regulating the stroke to within 0.5mm.

nnnn

When using magnetic sensors, the 1580 series sensor sits entirely within the extrusion, resulting in a

nnnn

smooth profile.

nnnn

The ranges of the guide units in the 6210 series, between the twin-rod cylinder makes provision fora

nnnn

simple yoke, the twin-rod version passes through a double yoke or "sledge" between the diameters of

nnnn

10-15and25mm.

nnnn

Thanks to the twin rod, double yoke design of the 6210 series, it is possible to either fix the body and use

nnnn

the ends of the rods, or alternatively to fix the rod ends and use the body as the moving part. The

nnnn

cylinder can be piped through the body orthrough the rods depending on the application.

nnnn

Stroke limiting screws are fitted at either end of the stroke. The substitution of these screws with shock

nnnn

absorbers makes it possible to use the cylinder on higher velocity applications (up to 500mm/sec.)

nnnn

Slots are provided along the edge of these units to accommodate 1580 series miniature sensors

"