عضویت 
ورود اعضا
راهنمای خرید
Accessories0 pages
accessories
adapter and extension cables
piezosystem jena delivers all open loop
standard translation systems and positioning
stages with a cable length of 1m (approx.
40 inches). Systems with integrated capacitive feed back sensors come with 1.6m
cable length. Systems with strain gage feed
back sensors have a cable length of 1.2m.
Systems which have a part number that is
extended by the suffix “E” or “D” come
with a total cable length of 2m (80 inches).
Please see chapter: “elements with integrated measurement system” page: 71.
All systems prepared for vacuum applications are delivered with 0.6m (24.25 inches)
polyamid insulated copper wires without
connectors for use inside the vacuum.
Separate cables with connectors may be
included for use outside the vacuum if a
power supply is ordered. Airside cable
length is 2m (80 inches).
piezosystem jena offers a wide range of
accessories and adapter cables. Please
note, each cable extension, or changing of
an existing cable configuration may influence
the performance of the system, especially
systems with integrated feed back sensors.
These systems should be recalibrated after
the cable configuration has been changed to
keep the full system specification available.
connectors
part no.
connector
intended use
Z-006-20
LEMO plug 2pin 0S.302
piezo voltage
Z-006-21
LEMO female 2pin 0S.302
piezo voltage
Z-006-30
LEMO plug 6pin 1S.306
SG sensor
Z-006-31
LEMO female 6pin 1S.306
SG sensor
Z-006-40
LEMO plug 4pin 0S.304
SG sensor
Z-006-41
LEMO female 4pin 0S.304
SG sensor
Z-006-50
BNC plug
monitor
Z-006-51
BNC female
monitor
Z-006-60
ODU plug 3pin series L
piezo voltage (nanoX)
Z-006-61
ODU female 3pin series L
piezo voltage (nanoX)
Z-006-64
ODU plug 4pin series L
external sensor
Z-006-65
ODU female 4pin series L
external sensor
Z-006-70
SMB straight for RG174
monitor
Z-006-30
Z-006-31
Z-006-50
Z-006-51
Z-006-70
monitor
piezo voltage
extension cables
piezosystem jena offers a wide range of extension and adapter cables.
Please look just the examples given below and use this scheme to give necessary information
to order it:
intended use
connector
connector
length
monitor
SMB plug
BNC plug
1m
piezo voltage
LEMO plug 2pin 0S.302
LEMO female 2pin 0S.302
2m
external sensor
ODU plug 4pin series L
ODU female 4pin series L
2m
SG sensor
LEMO plug 4pin 0S.304
LEMO female 4pin 0S.304
1m
68 www.piezojena.com
"
