6830 Delimber/Debarker Flail0 pages
The Peterson 6830 Debarker is a dedicated chain flail
nnnndebarking machine designed for long-stem chipping
nnnnoperations that require low bark or ash content. Designed
nnnnfor multiple stems, or trees up to 30 inches (76 mm) in
nnnndiameter, the 6830 quickly and effectively debarks even
nnnnthe hardest feedstock.
nnnnPowered by a fully enclosed Caterpillar C18 engine rated
nnnnat 765 hp (570 kW), the 6830 has the power to drive the 3
nnnnfail drums (a 4th flail is also available as an option).The two
nnnnlower flails are fixed in location, and the upper flails float
nnnnto match the log diameter.The 10-link flail chain is easily
nnnnreplaced through access doors.
nnnnThe operator sits in a fully enclosed, weather-proof cab,
nnnnand operates the machine through electronic joystick
nnnncontrols. The 6830 is available with either a Peterson 170 or
nnnn220 log loader depending on the needs of your operation.
nnnnThe large 60 inch (152 cm) wide, by 30 inch (76 cm) tall
nnnnfeed opening makes loading the 6830 easy.
nnnnTwo floating feed heads, and five fixed lower feed rolls
nnnncontrol the log through the debarking chamber, and two
nnnnrolls assist the stems to exit the machine.The massive
nnnnbark pusher removes the debarked debris to the side of
nnnnthe machine and can be configured to exit on either side
nnnndepending on the needs of your operation.
nnnnThe 6830 is controlled by an IQAN operating system,
nnnnwhich provides the operator with all critical engine and
nnnnperformance parameters. When paired with the Peterson
nnnn7900EL, the operator can control both machines.
nnnnWhen combined with a Peterson 7900EL Disc
nnnnChipper, the 6830 is the ultimate in-field
nnnnclean chipping plant.
nnnn■
nnnn7
nnnnPeterson
nnnnan Astec Industries Co.
"