عضویت 
ورود اعضا
راهنمای خرید
RG1310 pages
Panasonic
ideas for life
2012
Electronics Assembly System
catalog
1
• Radial Lead Component Insertion Machine
■ The RHSG has evolved.
■ By supporting 3/4 pitches, expanding the range of board sizes and increasing component
input, the high-density radial component insertion machines provide higher productivity.
C€
* It may not conform to Machinery Directive and EMC Directive in
case of optional configuration and custom-made specification.
Model ID | RG131 | |
Model No. | NM-EJR3A | NM-EJR4A |
PCB dimensions | L 50 HI x W 50 mm to L 508 mm x W 381 mm | L 50 mm x W 50 mm to L 508 mm x W 381 mm |
Max. speed *1 | 0.25 s/component to 0.6 s/component | 0.25 s/component to 0.6 s/component |
No.of component Inputs | 40 | 80 (Connection mode), 40 + 40 (Exchange mode) |
Applicable components | Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network | Pitch 2.5 mm, 5.0 mm, 7.5 mm, 10.0 mm Height Hn=Max. 26 mm Diameter D=Max. 18 mm Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network |
PCB exchange time | about 2 s to about 4 s (Room temperature 20°C) | about 2 s to about 4 s (Room temperature 20°C) |
Insertion direction | 4 directions (0 °, 90 °, -90 °, 180 | 4 directions (0 °, 90 °, -90 °,180 °) |
Electric source *2 | 3-phase AC 200 V, 3.5 kVA | 3-phase AC 200 V, 3.5 kVA |
Pneumatic source | 0.5 MPa, 80 L/min (A.N.R.) | 0.5 MPa, 80 L/min (A.N.R.) |
Dimensions | W 3 200 mm x D 2 417 mm x H1 620 mm *3 | W3200mmxD2417mmxH1 620mm*3 |
Mass | 2 250 kg | 2 350 kg |
* Values such as maximum speed may vary depending on operating conditions.
* Please refer to the "Specification" booklet for details.
*1: On condition
*2: Compatible with 3-phase 220 / 380 / 400 / 420 / 480 V
*3: Excluding signal tower
"
