K1 Sealed0 pages

Specifications Subject To Change Without Notice www.ottoexcellence.com 95
ROCKER SWITCHES
SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN
ROCKERS
K1/K2
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
The K series rockers are rugged, high performance sealed
switches designed for use under severe conditions found inmarine,
appliance, heavy equipment and industrial control applications.
Sealed to IP68S with an optional panel seal available.
The K1 series is offered in single pole configuration while the K2
series is available in single and double pole configurations. Both
series offer illuminated models. Illumination can be independent
or dependent of the switch position or a combination of both. A
choice of red, green, clear or amber colored lenses are offered
in illuminated models. Illumination options include incandescent,
LED or neon light sources.
Mounting is simple and quick; snaps into panel from the front.
The OTTO snap-in design supports a variety of panel thicknesses
with just one cutout size specified.
A choice ofmodels are offered to handle power levels to 16 amps,
1/2 HP and low level electronic switching applications.
OTTO can provide custom colors upon request. Value-added
assemblies with wire leads are also available. Please consult the
factory for assistance.
Features:
• Withstands direct water spray
• Watertight to IP68S
• Fits industry standard panel openings for drop-in
replacement of panel sealed & unsealed switches
• Snap-in feature accommodates a wide range of
panel cutouts
• Switches up to 16 amps
• UV and solvent resistant
• Withstands extreme shock & vibration
• Custom legends available
• 2 & 3-position, momentary & maintained action
• Incandescent, LED & neon illumination with
independent & dependent light source options
• UL & CSA recognized
• Ignition protected
• RoHS &WEEE compliant
K1 Series
Single Pole
K2 Series
Single & Double Pole
®
Standard Characteristics/Ratings:
ELECTRICAL RATINGS:
Load Sea Level @ 28VDC Cycles
or 125/250VAC, 60Hz
Resistive 16A 25,000
Resistive 10A 50,000
Inductive 10A 25,000
Lamp 5A 25,000
Motor 0.5HP 25,000
DWV 1050Vrms except across light terminals
Low Level 10mA @ 30mV
Electrical Life: See Rating Chart
LIGHTING:
Light Source Rating
Incandescent (VDC) 6V, 12V, 24V
Neon (VAC) 125V, 250V
LED (VDC) 2V, 6V, 12V, 24V
Mechanical Life: 100,000 cycles
Seal: IP68S
Operating Temp Range: -30°C to +85°C
MATERIALS:
Case: Thermoplastic
Button: Thermoplastic
Base: Thermoplastic
Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level
Terminal Hardware: Screws and lockwashers provided when applicable
K1/K2 series recommended Quick Connect terminals:
AMP 60253-2 for 12-16 AWG
AMP 42100-2 for 14-18 AWG
Mounting Hardware: None provided