450-M0 pages
OMEC
Technical details
and so the machine
compressed air.
does
not need any
OMEC 450-M
A SMALL-SIZE MACHINE
FOR QUALITY WORKS
OMEC 450-M is the smallest milling machine for
joints manufactured by the OMEC company.
It is a full manual machine composed of a milling
head that uses a pin to copy a template with four
different joint pitches: 25-40-50-60mm.
The milling machine is very easy to use. Adjusting
screws can all be accessed from the front side of
the head.
The milling cycle is obtained by gripping the two
levers on the sides of the head and copying the
contour of the previously adjusted template. This
machine can process single male workpieces,
single female workpieces as well as combined
male-female workpieces.
The spindle is fitted with an eccentric milling cutter
with only one cutting side. Therefore, after the
sharpening procedure, the outer diameter can be
adjusted by simply rotating the milling cutter
towards the + symbol. This adjustment allows
operators to sharpen the tool several times before
replacing it.
With this operation it is also possible to adjust the
joint's coupling depending on height.
The joint pitch, i.e. the male size, can be changed
manually by loosening the two fastening screws of
the template and rotating until the desired size
reading appears on the lower side.
The spindle’s motor can be provided in the threephase or single-phase version, so that it can be
used non only for industrial purposes.
Workpieces are locked manually by means of two
eccentric shafts that are controlled by handles,
The high number of revolutions of the tool's motor
guarantees a perfect machining of solid wood.