OMAX® 80160 JetMachining® Center0 pages

PRECISION ABRASIVE WATERJET SYSTEMS
Equipment Specifications
80160
OMAX® 80160 JetMachining® Center
80160
This model 80160 JetMachining Center
cuts complex flat parts out of most materials
including metal, plastic, glass, ceramics, stone, and composites directly from a CAD drawing or DXF file. Extremely hard, reflective and nonconductive
materials can also be cut, making it a valuable addition to existing shop capabilities. No tool changes or complex fixturing dramatically reduces setup times, and the smooth finish often eliminates the need for secondary machining.
Large scale precision machining: For larger parts or multiple parts from large stock up to 6' x 12'.
Standard Features
• OMAX Intelli-MAX® software offers higher average cutting speeds and greater precision with free upgrades for the life of the machine
• Programmable Motorized Z-Axis
with precision OMAX MAXJET® 5i Nozzle Assembly
• Ball screw drive inside the Y-axis bridge fully enclosed inside bellows
• Ball screw drive inside X-axis fully enclosed inside coated steel covers
• Scissor-style hard plumbing
• Component protection against water, dirt, and grit
• High efficiency direct drive pump
systems available in 30, 40, 60, 70 and 80 hp with pressures up to 55,000 psi and 60,000 psi
• Rapid Water Level Control for quiet and clean submerged cutting
• Bulk Abrasive Feed Assembly transports
garnet from the assembly’s large hopper into the small hopper located at the Z-axis
• Solids Removal System (SRS) designed for tough industrial use (available as an option)
• Tilt-A-Jet® taper compensating
abrasivejet cutting head (available
as an option)
• Shipped as a completely pre-assembled
and factory-tested system
Abrasivejet Benefits
• Machines a wide range of materials
and thicknesses
• Does not create heat-affected zones
or mechanical stresses
• Rapid setup, no tool changes required
• Minimal fixturing required
• Leaves behind a satin-smooth edge,
reducing secondary operations
• No noxious gases, liquids or oils
used in (or caused by) the machining
process
• Completes most work below 80 dBA at 1 meter for submerged cutting
• Environmentally “green” system with quiet and clean operation, low electrical
and abrasive consumption
C o r p o r a t i o
n
The OMAX Technology Guarantee entitles you, as the original owner, to free OMAX software upgrades for the life of the machine.
Connect and follow OMAX for the latest news
in waterjet technology.