MMC Series Catalog (Miniature slip rings,economical,with capsule)0 pages

M OF L O N

MO FL O N

MMC SERIES

MMC Series Miniture slip rings with capsules

Flange Mounting Instructions

MMC series slip rings are miniture with OD 12.5mm or smaller.(See other miniture type slip rings - MSP series)
Special designed for CCTV or tiny rotating system, Special fit for miniature

1. Align the mounting holes in the flange to mounting base and install flat washers and thread
forming screws (NOT SUPPLIED) for plastic. Securely tighten screws.

rotating system of transmitting low controlling signal.
Standard, off-the-shelf,no through bore,solid

2. Route the wiring and make the necessary connections. Do not allow the wiring to restrict
free rotation of the slip ring.

Circuits combination is available (sucn as video, control , sensor, power, Ethernet and so on)
Lower torque low contact wear rates

3. Position a screw or dowel (NOT SUPPLIED) in the anti-rotation tab to the dimension as shown.

Support video, control,sensor,power, Ethernet signals
MODEL#

OD*LENGTH
(MM)

RINGS

MMC182

6

MMC250

12.5*25
(0.49"*0.98")

12

MMC397

01

12.5*18.2
(0.49"*0.72")

15.5*39.7
(0.59"*1.56")

24

CURRENT

VOLTAGE

MAX SPEED

Signal(2A)

240VAC/VDC

250RPM

Signal(2A)

240VAC/VDC

250RPM

Signal(2A)

240VAC/VDC

CAUTION: Because of possible geometric mismatching between the customer's application and
the slip ring, 'hard mounting' of both ends of the slip ring (i.e., securing the rotor and stator such
that there is NO floating during operation) is not recommended and may cause premature failure

250RPM

WWW.MOFLON.COM

SALES@MOFLON.COM

086.755.3358.2126

WWW.MOFLON.COM

SALES@MOFLON.COM

086.755.3358.2126

02