MR fasteners0 pages

MLT
MR fasteners

MR2 fasteners

Fasteners with pre mounted staples.
Only one tool made of aluminium and
hardened steel with 3 quick exchangeable
combs for all types.
Installation tool with carrying box

Installation:

MR 1

MR 2

MR 3

Picture

Belt thickness
Min. pulley diameter
Max. belt tension
Material
Hinge material (*)

1.5 to 3,2 mm (1/16”-1/8”)

3.0 to 5.0 mm (1/8”-3/16”) 4.8 to 6.4 mm (3/16”-1/4”)

50 mm (2”)

75 mm (3”)

100 mm (4”)

19 N/mm (100 PIW)

30 N/mm (170 PIW)

38 N/mm (200 PIW)

Non-magnetic stainless steel or galvanized steel
or magnetic stainless steel (for special application).
Polyamide covered
stainless steel cable
Ø 2,3 mm (0.08”)

Polyamide covered
stainless steel cable
Ø 3,6 mm (0.141”)

Polyamide covered
stainless steel cable
Ø 5,1 mm (0.203”)

Installation

By using a hammer tool.

Packaging

Standard boxes each containing complete 4 splices (8 strips + 8 hinge cables
+ 8 washers) for belt width from 300 mm to 1,500 mm in one piece.
Special packaging in boxes with 50 strips 1.2 m long without hinge
cable or hinge pins (*) or in length up to 2.75 m long.

ACCESSORIES:

Plastic hammer, Installation tool (minimum 300 mm) with punch.
(*) Hinge pin are available on demand