IND560fillplus0 pages
Formulation
FillPlus-560
IND560fillplus Application Module
Formula Table Stores 25 Custom Formulas
Reduces the amount of time needed to change from one formula to
another as the actual formulas can be pre-programmed and stored
for easy retrieval. This also reduces the chance of errors that can occur when trying to continually create formulas from scratch during the
production day.
Formula Rescaling
Formulas can be rescaled automatically based on percentage of programmed target, percentage of the available amount of one of the
materials in the formula, or to a desired total formula weight.
Assignment of Auxiliary Output per Formula
Each of the 25 formulas can have the designated Auxiliary Output
turned on and off based on the weight or production time requirements of that particular formula.
New User Interface Screens
Building on the user friendly interface of the Fill-560, the FillPlus-560
adds new softkeys and set up screens to quickly program, change
and save formulas.
Application-Specific Shared Data
New available Shared Data fields include: Formula ID, Formula Description, Formula Units, Formula Rescale Type, Formula Rescale
Value, Total Formula Weight, Actual Total Formula Weight and Total
Formula Variance. This data can be printed, collected or used to trigger additional actions.
Totalization
Total formula weight can be accumulated within the Formula Table.
Totalization selections are All, Good (batches not aborted) or None.
Uses Familiar IND560 Target Table
Formulas are built by recalling material records that have been stored
in the Target Table. The Target Table in the Fill-560 can store up to 99
material records.
Auto Start Feature
Initiates the filling process as soon as a formula is selected or rescaled and the operator exits to the home screen This eliminates the
need for an additional “Start Weigh-in” signal.
Retains All Fill-560 Features and Benefits
All existing features of the Fill-560 application software remain
available with the FillPlus-560. Much of the performance of the
FillPlus-560 is dependent on setup that occurs within the nowfamiliar Fill-560 software.
Enhanced Formulation Capabilities
For the IND560
Fill-560 added advanced features to the standard target
control capabilities (simple filling or dispensing) of the
IND560 weighing terminal; now the FillPlus-560 Application Module takes these features to the next level. This
application, which can be added to any IND560 running
firmware 4.03 or higher, allows the storage, retrieval,
and rescaling of up to 25 customer-specific formulas.
This dramatically reduces the time spent reprogramming
the terminal when a different multi-material formula is
needed.