NEFF Ball Screw Drives KGT 1616 & KGT 32600 pages

Higher speeds at less motor capacity

NEFF Ball Screw Drives | KGT1616-P8-3,0 | KGT3260-P10-3,5

NEFF Ball Screws extended its product range of Ball Screw Drives. For the demand of higher speeds at the same mass moment of interia and
less motor capacity there are two new products:
– KGT 1616-P8-3,0 with cylindrical or flanged nut
– KGT 3260-P10-3,5 with cylindrical or flanged nut.
General technical data:
The thread profile of NEFF ball screws is produced by cold rolling. Both screw and nut have an arched thread profile. The load angle
is 45°. The new ball screw drives are available in accurate classes up to T5 (12µm/300mm).
The integrated frontal channel deflection system at the KGT 1616-P8-3,0 is responsible for low noise operation.
According to this advantage the 6-start ball screw KGT 3260-P10-3,5 is characterized at its also low noise cover deflection system.
The NEFF ball screws range corresponds to DIN 69051 and the NEFF-Standard. Effective in appropriate quantities nuts can also be delivered
in customized designs.
Technical data:
Length:t
Straightness:t
t
t
Axial backlash:t
Material spindle: t

up to 5600 mm, > 6000 mm on request
L < 500 mm: 0,05 mm
L 500 –1000 mm: 0,08 mm
L > 1000 mm: 0,1 mm
0,05 mm (standard; backlash-free: on request)
1.1213 Cf53

Material nut:t
Hardness:t
Accuary classes:t
t
t
Thread direction: t

1.3505 100Cr6
57 +8 HRC
T5: 23μm / 300 mm
T7: 52μm / 300 mm
T9: 130μm / 300 mm
Right hand thread

NEFF Gewindetriebe GmbH | Karl-Benz-Str. 24 | 71093 Weil im Schönbuch
Phone: +49 (0) 71 57 / 5 38 90-13 | Fax: +49 (0) 71 57 / 5 38 90-25 | www.neff-gewindetriebe.de | info@neff-gewindetriebe.de