عضویت 
ورود اعضا
راهنمای خرید
GCU-30000 pages
GCU-3000
Digital Gen-set PLC Control Unit
Provides Full Instrumentation & Protection on Any Generator Set
Features
Micro-Processor Auto Control & Protection
Easy to Read Large LCD Display
Modularity Design, Easy to Install
Provide Accurate Temperature and Oil Pressure Display
Provide Full Engine & Generator Alarms Signals Shutdowns
All Settings Can Be Done Directly on GCU-3000 or PC Connection*1
Provide Emergency Stop and Voltage Adjustment on Front Panel*2
Total of 15 Memorable Event Logs
Optional USB / RS485 / Ethernet Remote Communication Functions
J1939 CAN Bus Protocol Available. (Option)
Protection & Alarm Status Indicators
Large LCD Display
Engine Start Failure
Emergency Stop Activated
Programmable Display with 3 Phase Volts, Amp & Freq.
Engine Over Speed
High Engine Temp.
Engine Operation Hours & Battery Voltage Display
Sensor Failure
MPU Failure
Can Display Different Unit Of Temperature & Oil Pressure
Abnormal AC Voltage
Generator Over Load
Failure Signal Status By Graphic Display
Low Engine Oil Pressure
Abnormal Battery Voltage
Specifications
Power Input
Voltage 8~60 VDC (12V , 24V)
AC Sensing Input
Voltage 15~500 VAC
Frequency 50/60 Hz
Power Dissipating
MPU Signal Input
Voltage
±2~±70 VAC
Frequency Min. 100 Hz
CT Specification
Max. 10 KHz
Burden 2.5 VA
Max. 7 watt
Environment
Physical Specification
Operating Temperature
-20~70 ℃
Panel Cut-Out
251.5 x 157.0 ±0.5 mm
Relative Humidity
Maximum 95%
Dimensions
290.0 (L) x 166.0 (W) x 70.0 (H) mm
Max. Vibration
5~25 Hz , ±1.6 mm 25~100 Hz , a=4g
Weight
1341 g ±2%
-55~125 ℃ ±2 ℃ (Max.)
Semiconductor Sensor (PS-01)
Auxiliaries
Digital Sensor (TS-01)
Mechanical Specifications
*1
*2
0~120 Psi ±2.5% (Max.)
(Unit : mm )
Customized settings are auto-saved into memory and will remain even when power is off.
Provide gen-set run-in modulate model and manual start and stop functions, when user proceed modulate controller will shut down all protect functions.
TEL: +886-7-8121771
FAX: +886-7-8121775
Head Office: No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung, TAIWAN
Please link to http://www.kutai.com.tw for detailed manual.
